Wait for edge not working

[int-red]

Waiting on a input for a rising or falling edge with GPIO.wait_for_edge(channel, GPIO.RISING) does not work.
The function never returns.

[kroko]

Can replicate the issue for GPIO.wait_for_edge()

Using Armbian Stretch which is distro noted as working by vendor SinoVoip.

# uname -a
Linux bananapim2plus 4.19.62-sunxi #5.92 SMP Wed Jul 31 22:07:23 CEST 2019 armv7l GNU/Linux

# lsb_release -a
No LSB modules are available.
Distributor ID:	Debian
Description:	Debian GNU/Linux 9.9 (stretch)
Release:	9.9
Codename:	stretch

[kroko]

@int-red btw have you had success with other RPi.GPIO fork, if yes, which one?

[kroko]

interlinking issues #3

[int-red]

@int-red btw have you had success with other RPi.GPIO fork, if yes, which one?

No, I didn't have success with other RPi.GPIO forks.
I rewrote my code to use polling on the input - not a nice solution, but it worked for my use-case.

[kroko]

@int-red thanks for the followup. I solved the issue by switching to NanoPi ^_^ where for both vendor's supplied distro as well as Armbian (went with the latter) external interrupts work OOB using https://github.com/auto3000/RPi.GPIO_NP