Used m3 Gas not updating

[TheBrankman]

Hi,

Several sensors seem to work.
I can change the thermostat temperature and see changing values for humidity and outdoor temperature.

But the sensors for used amount of gas for heating and warm water keep showing the same values and are not changing/updating.

In the Bosch app those values are updated with no problem.

I am also running the Bosch Homecom integration.

[joddye2]

This is what the output of the energy sensor looks like:

id: /energy/history
type: energyRecordings
writeable: 0
recordable: 0
used: "true"
available: "true"
value:

• d: 27-02-2026
  T: 6.2
  gCh: 87.89
  gHw: 2.91
• d: 28-02-2026 »»» The last date always yesterday
  T: 7 »»» Average daily outdoor temp
  gCh: 77.77 »»» consumption in kWh for heating
  gHw: 9.19 »»» consumption in kWh for DHW

[joddye2]

For me, the sensor value is updated, and perhaps this is the problem, because the used m3 is added several times a day, so 9.3 m3 / day became 239 m3 / day.

[joddye2]

In the original integration (so in this one too) there are two options in the settings.

• "Use new statistic API"
• "Use optimistic mode for some functions (currently Easycontrol Operation mode set)."

I've tried to turn on the new statistic API, but nothing happened.

bosch-thermostat/home-assistant-bosch-custom-component#298
bosch-thermostat/home-assistant-bosch-custom-component#84
https://github.com/bosch-thermostat/home-assistant-bosch-custom-component/wiki/New-API-support#reasoning

[TheBrankman]

After 1,5 day, the values still have not been changed.
I have also the Bosch Homecom integration installed and there the energy history has also no changes since I have installed it several days ago.

The Bosch App is updating every day.

[joddye2]

Mine changing over days.

[arthurgostumski]

this also doesnt work on energy/gas dashboard, gas is expected to have kwh units and currently its in m3 and therefore it doesnt actually allow you to pull it into gas section of the dashboard

[TheBrankman]

For me it is still nog updating.... running since several days

[joddye2]

Strange...since 3 days also not updated for me.

Also when I fetch the data manually:
path: /resource/energy/history

• - d: 02-03-2026
  

  T: 8.9
  gCh: 85.56
  gHw: 12.5

The latest data truely from 3 days ago.