Not sure if this is where to post, to help others,
But when trying to compile the firmware for the Senscap indicator on a newly installed Home Assistant 2025.8.2, an error states
INFO ESPHome 2025.8.2
INFO Reading configuration /config/esphome/HomeDicator.yaml...
WARNING The selected ESP-IDF framework version is not the recommended one. If there are connectivity or build issues please remove the manual version.
WARNING The selected ESP-IDF framework version is not the recommended one. If there are connectivity or build issues please remove the manual version.
Failed config
i2c: [source /config/esphome/HomeDicator/core/config/hardware.yaml:29]
This feature requires at least framework version 5.4.2.
- id: bus_a
sda: GPIO39
scl: GPIO40
scan: False
The Section from HomeDicator/core/config/hardware.yaml show this, but updating the versions doent seem to help.
esp32:
board: esp32-s3-devkitc-1
variant: esp32s3
flash_size: 8MB
framework:
type: esp-idf
version: 5.2.2
platform_version: 6.7.0 **Current Version is 6.12.0 that supports ESP-IDF v 5.5**
Im not skilled in this area, but wanted to note that the build fails, and cant install this awesome firmware
Not sure if this is where to post, to help others,
But when trying to compile the firmware for the Senscap indicator on a newly installed Home Assistant 2025.8.2, an error states
The Section from HomeDicator/core/config/hardware.yaml show this, but updating the versions doent seem to help.
Im not skilled in this area, but wanted to note that the build fails, and cant install this awesome firmware