Xiaomi Aquara WXKG11LM single click stopped working

[mxf14]

Hi All,

I run my Zigbee2mqtt since many years without major issues.

Since a week or so, scripts linked to my Xiaomi Aquara WXKG11LM stopped working. I looked into the logs and realized that nothing is captured on a single click. Double, triple and quadruple clicks are well recognized and if I attach the script to a double click it executes.

[6/3/2026, 10:39:11 PM] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bouton_salon', payload '{"action":"double","battery":100,"device_temperature":25,"last_seen":"2026-06-03T20:39:11.818Z","linkquality":48,"power_outage_count":40,"voltage":3035}'

[6/3/2026, 10:39:11 PM] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bouton_salon/action', payload 'double'

[6/3/2026, 10:39:14 PM] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bouton_salon', payload '{"action":"triple","battery":100,"device_temperature":25,"last_seen":"2026-06-03T20:39:14.784Z","linkquality":45,"power_outage_count":40,"voltage":3035}'

[6/3/2026, 10:39:14 PM] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bouton_salon/action', payload 'triple'

[6/3/2026, 10:39:18 PM] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bouton_salon', payload '{"action":"quadruple","battery":100,"device_temperature":25,"last_seen":"2026-06-03T20:39:18.284Z","linkquality":48,"power_outage_count":40,"voltage":3035}'

[6/3/2026, 10:39:18 PM] z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bouton_salon/action', payload 'quadruple'

This behavior is consistent with the action shown on the Zigbee2mqtt :

Its updated on double, triple and quadruple click, but not on single click.

Interesting as well is that all switches of the same type are affected and all did work before.

I tried it with Zigbee2mqtt 2.5.x and 2.11.x, the behavior is identical.

Did anybody experience this in the past? Any clue or hint about the root cause?

Thanks a lot