compile doesn't finish

[fromport]

Host is a fresh installed debian Jessie machine.

Start Compile Module 
make: Entering directory '/home/dth/OrangePiH5/kernel'
  CHK     include/generated/uapi/linux/version.h
  CHK     include/generated/utsrelease.h
  CALL    scripts/checksyscalls.sh
  CC      scripts/mod/devicetable-offsets.s
  GEN     scripts/mod/devicetable-offsets.h
  HOSTCC  scripts/mod/file2alias.o
  HOSTLD  scripts/mod/modpost
  CC [M]  security/fivm/fivm_main.o
  CC [M]  security/fivm/fivm_crypto.o
  CC [M]  security/fivm/fivm_dev.o
  LD [M]  security/fivm/fivm.o
  CC [M]  crypto/crypto_user.o
  CC [M]  crypto/af_alg.o
  CC [M]  crypto/algif_hash.o
  CC [M]  crypto/algif_skcipher.o
  CC [M]  crypto/algif_rng.o
  CC [M]  drivers/bluetooth/rtk_btusb.o
  CC [M]  drivers/bluetooth/rtl_btlpm.o
  CC [M]  drivers/char/timer_test/sunxi_timer_test.o
  CC [M]  drivers/crypto/sunxi/sunxi_ss.o
  CC [M]  drivers/crypto/sunxi/sunxi_ss_proc_comm.o
  CC [M]  drivers/crypto/sunxi/v3/sunxi_ss_reg.o
  CC [M]  drivers/crypto/sunxi/v3/sunxi_ss_proc.o
  LD [M]  drivers/crypto/sunxi/ss.o
  CC [M]  drivers/gator/gator_main.o
  CC [M]  drivers/gator/gator_events_block.o
  CC [M]  drivers/gator/gator_events_irq.o
  CC [M]  drivers/gator/gator_events_meminfo.o
  CC [M]  drivers/gator/gator_events_mmapped.o
  CC [M]  drivers/gator/gator_events_net.o
  CC [M]  drivers/gator/gator_events_perf_pmu.o
  CC [M]  drivers/gator/gator_events_sched.o
  LD [M]  drivers/gator/gator.o
  CC [M]  drivers/input/sw-device.o
  CC [M]  drivers/input/keyboard/sunxi-keyboard.o
make[3]: *** No rule to make target 'drivers/input/misc/input_demo.c', needed by 'drivers/input/misc/input_demo.o'.  Stop.
scripts/Makefile.build:455: recipe for target 'drivers/input/misc' failed
make[2]: *** [drivers/input/misc] Error 2
scripts/Makefile.build:455: recipe for target 'drivers/input' failed
make[1]: *** [drivers/input] Error 2
Makefile:797: recipe for target 'drivers' failed
make: *** [drivers] Error 2
make: Leaving directory '/home/dth/OrangePiH5/kernel'

The makefile in question:

kernel/drivers/input/misc/Makefile -> obj-m += input_demo.o

Full makefile quoted for reference:

#
# Makefile for the input misc drivers.
#

# Each configuration option enables a list of files.

obj-$(CONFIG_INPUT_88PM860X_ONKEY)      += 88pm860x_onkey.o
obj-$(CONFIG_INPUT_88PM80X_ONKEY)       += 88pm80x_onkey.o
obj-$(CONFIG_INPUT_AB8500_PONKEY)       += ab8500-ponkey.o
obj-$(CONFIG_INPUT_AD714X)              += ad714x.o
obj-$(CONFIG_INPUT_AD714X_I2C)          += ad714x-i2c.o
obj-$(CONFIG_INPUT_AD714X_SPI)          += ad714x-spi.o
obj-$(CONFIG_INPUT_ADXL34X)             += adxl34x.o
obj-$(CONFIG_INPUT_ADXL34X_I2C)         += adxl34x-i2c.o
obj-$(CONFIG_INPUT_ADXL34X_SPI)         += adxl34x-spi.o
obj-$(CONFIG_INPUT_APANEL)              += apanel.o
obj-$(CONFIG_INPUT_ARIZONA_HAPTICS)     += arizona-haptics.o
obj-$(CONFIG_INPUT_ATI_REMOTE2)         += ati_remote2.o
obj-$(CONFIG_INPUT_ATLAS_BTNS)          += atlas_btns.o
obj-$(CONFIG_INPUT_BFIN_ROTARY)         += bfin_rotary.o
obj-$(CONFIG_INPUT_BMA150)              += bma150.o
obj-$(CONFIG_INPUT_CM109)               += cm109.o
obj-$(CONFIG_INPUT_CMA3000)             += cma3000_d0x.o
obj-$(CONFIG_INPUT_CMA3000_I2C)         += cma3000_d0x_i2c.o
obj-$(CONFIG_INPUT_COBALT_BTNS)         += cobalt_btns.o
obj-$(CONFIG_INPUT_DA9052_ONKEY)        += da9052_onkey.o
obj-$(CONFIG_INPUT_DA9055_ONKEY)        += da9055_onkey.o
obj-$(CONFIG_INPUT_DM355EVM)            += dm355evm_keys.o
obj-$(CONFIG_INPUT_GP2A)                += gp2ap002a00f.o
obj-$(CONFIG_INPUT_GPIO_TILT_POLLED)    += gpio_tilt_polled.o
obj-$(CONFIG_INPUT_GPIO)                += gpio_event.o gpio_matrix.o gpio_input.o gpio_output.o gpio_axis.o
obj-$(CONFIG_HP_SDC_RTC)                += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_IMS_PCU)             += ims-pcu.o
obj-$(CONFIG_INPUT_IXP4XX_BEEPER)       += ixp4xx-beeper.o
obj-$(CONFIG_INPUT_KEYCHORD)            += keychord.o
obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)      += keyspan_remote.o
obj-$(CONFIG_INPUT_KXTJ9)               += kxtj9.o
obj-$(CONFIG_INPUT_M68K_BEEP)           += m68kspkr.o
obj-$(CONFIG_INPUT_MAX8925_ONKEY)       += max8925_onkey.o
obj-$(CONFIG_INPUT_MAX8997_HAPTIC)      += max8997_haptic.o
obj-$(CONFIG_INPUT_MC13783_PWRBUTTON)   += mc13783-pwrbutton.o
obj-$(CONFIG_INPUT_MMA8450)             += mma8450.o
obj-$(CONFIG_INPUT_MPU3050)             += mpu3050.o
obj-$(CONFIG_INPUT_PCAP)                += pcap_keys.o
obj-$(CONFIG_INPUT_PCF50633_PMU)        += pcf50633-input.o
obj-$(CONFIG_INPUT_PCF8574)             += pcf8574_keypad.o
obj-$(CONFIG_INPUT_PCSPKR)              += pcspkr.o
obj-$(CONFIG_INPUT_PM8XXX_VIBRATOR)     += pm8xxx-vibrator.o
obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY)     += pmic8xxx-pwrkey.o
obj-$(CONFIG_INPUT_POWERMATE)           += powermate.o
obj-$(CONFIG_INPUT_PWM_BEEPER)          += pwm-beeper.o
obj-$(CONFIG_INPUT_RB532_BUTTON)        += rb532_button.o
obj-$(CONFIG_INPUT_RETU_PWRBUTTON)      += retu-pwrbutton.o
obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
obj-$(CONFIG_INPUT_SGI_BTNS)            += sgi_btns.o
obj-$(CONFIG_INPUT_SPARCSPKR)           += sparcspkr.o
obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)   += twl4030-pwrbutton.o
obj-$(CONFIG_INPUT_TWL4030_VIBRA)       += twl4030-vibra.o
obj-$(CONFIG_INPUT_TWL6040_VIBRA)       += twl6040-vibra.o
obj-$(CONFIG_INPUT_UINPUT)              += uinput.o
obj-$(CONFIG_INPUT_WISTRON_BTNS)        += wistron_btns.o
obj-$(CONFIG_INPUT_WM831X_ON)           += wm831x-on.o
obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o
obj-$(CONFIG_INPUT_YEALINK)             += yealink.o
obj-m += input_demo.o

[ZokiPokiMk]

Comment the last line in makefile obj-m += input_demo.o