Hydraulic fluid testing

[Chronak-maker]

So the test was successful and was solved, the hydraulic fluid refill was successful with the help of the workshop via the vehicle inspection for the UsedPlus modification and it worked. And hydraulic fluid leakage is solved without error, hydraulic fluid consumption is solved by setting.

[XelaNull]

I'm curious what you have setting value at? I have tuning yet to do and it may help me to understand what you have this set to.

[Chronak-maker]

I first bought the tractor in the store with UsedPlus and then first checked it in the workshop with the new look open table from the Usedplus modification. I checked the hydraulic fluid and it was already about 75 percent on the tractor after I drove the tractor for a few minutes and tested how it would behave even with the attached trailer, which had a rapidly diminishing leak. Then I tried the service again? And I think the hydraulic fluid was topped up when I did the service. Then I made your settings in the game menu, how much all liquids in one setting will decrease in percentage. So I set it to 25 percent? Second, I tested the tractor with a trailer attached? And the rapid consumption of hydraulic fluid and grease decreased slowly, which I think is realistic, and decreased by every single digit. Not, for example, ten numbers or 15 numbers, which was the basic default value before this function was in the game menu with the all-in-one lubricant settings.

[antler22]

Just an observation - I feel the general fluid level leakage/drop rate is very high right now. I run a large savegame where my AI workers work on their own for hours at a time, simulating RL best I can. What I've found is vehicles are running out of hyd fluid multiple times per day, every few hours. This isn't common in real life, and even with fluid and maintenance rates dropped to 25% the rate I need to repair and refill still seems very high.

[Chronak-maker]

Thanks for the message, otherwise I don't use AI workers that much yet. But if the hydraulic fluid leakage is very high, what do you say? So you'll definitely fix it in time. Because I play for myself all the time without AI Computer Workers. And unfortunately I didn't mention that.

[XelaNull]

I did retune it a couple weeks ago. Curious if you still feel it too high. Please take care in fixing any hydraulic leaks that you might have. The Admin Control Panel will allow you to more thoroughly inspect and debug your vehicles

[antler22]

MAINTENANCE_REALISM_CHANGES.md

My personal tweaks are attached here. I do play a bit different than some, with long work days and lots of courseplay. So far, these settings have been far more acceptable for maintenance and failure rates.