memtest/config.h at master · TechnologyClassroom/memtest · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
/* config.h - MemTest-86  Version 3.0
 *
 * Compile time configuration options
 *
 * Released under version 2 of the Gnu Public License.
 * By Chris Brady, cbrady@sgi.com
 */

/* PARITY_MEM - Enables support for reporting memory parity errors */
/*	Experimental, normally enabled */
#define PARITY_MEM

/* SERIAL_CONSOLE_DEFAULT -  The default state of the serial console. */
/*	This is normally off since it slows down testing.  Change to a 1 */
/*	to enable. */
#define SERIAL_CONSOLE_DEFAULT 1

/* SERIAL_TTY - The default serial port to use. 0=ttyS0, 1=ttyS1 */
#define SERIAL_TTY 1

/* SERIAL_BAUD_RATE - Baud rate for the serial console */
#define SERIAL_BAUD_RATE 115200

/* START_FAIL_SAFE - Default 0 = normal. Change to 1 to always start in fail */
/*	safe mode */
#define START_FAIL_SAFE 0

/* BEEP_MODE - Beep on error. Default off, Change to 1 to enable */
#define BEEP_MODE 0

/* BEEP_END_NO_ERROR - Beep at end of each pass without error. Default off, */
/*	Change to 1 to enable */
#define BEEP_END_NO_ERROR 0

/* FIRST_PASS_HALF_ITERATIONS - First pass twice faster / half iterations. */
/*	Change to 0 to disable */
#define FIRST_PASS_HALF_ITERATIONS 1

/* SCRN_DEBUG - extra check for SCREEN_BUFFER
 */
/* #define SCRN_DEBUG */

/* APM - Turns off APM at boot time to avoid blanking the screen */
/*	Normally enabled */
#define APM_OFF

/* USB_WAR - Enables a workaround for errors caused by BIOS USB keyboard */
/*	and mouse support*/
/*	Normally enabled */
#define USB_WAR