Arduino-Projects/Remote_Led_Control.ino at main · TheBraveByte/Arduino-Projects · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
//Last Project
#include <IRremote.h>
int remotePin=11;// pin connect to the infared remote control
IRrecv IR(remotePin);
decode_results rcd;
int redLed=12;
int greenLed=9;
int blueLed=10;
String remote_command;
int timeDelay=1000;

int ledBright=255;
void setup() {
  // put your setup code here, to run once:
Serial.begin(9600);
IR.enableIRIn();
pinMode(redLed,OUTPUT);
pinMode(greenLed,OUTPUT);
pinMode(blueLed,OUTPUT);

}

void loop() {
  // put your main code here, to run repeatedly:
while(IR.decode(&rcd)==0){
  }
delay(timeDelay);
IR.resume();

//POWER ON THE ALL LED
if(rcd.value==0xFFA25D){
  remote_command="POWER ON";
  Serial.println(remote_command);
  digitalWrite(redLed,HIGH);
  digitalWrite(greenLed,HIGH);
  digitalWrite(blueLed,HIGH);
  }

// TURN ALL THE LEDS OOFF
if(rcd.value==0xFFB04F){
  remote_command="POWER OFF";
  Serial.println(remote_command);
  digitalWrite(redLed,LOW);
  digitalWrite(greenLed,LOW);
  digitalWrite(blueLed,LOW);
  }

//CONTROL IF ZERO IS PRESS
if(rcd.value==0xFF6897){
  remote_command="DEFAULT ZERO";
  Serial.println(remote_command);
  analogWrite(redLed,ledBright);
  analogWrite(greenLed,ledBright);
  analogWrite(blueLed,ledBright);
  }

//CONTROL IF ONE IS PRESS
if(rcd.value==0xFF30CF){
  remote_command="ONE PRESSED";
  Serial.println(remote_command);
  analogWrite(redLed,ledBright);
  analogWrite(greenLed,0);
  analogWrite(blueLed,0);
  }

//IF 2 IS PRESSED
if(rcd.value==0xFF18E7){
  remote_command="2 Pressed";
  Serial.println(remote_command);
  analogWrite(redLed,0);
  analogWrite(greenLed,ledBright);
  analogWrite(blueLed,0);
  }

// for 3
if(rcd.value==0xFF7A85){
  remote_command="3 pressed";
  Serial.println(remote_command);
  analogWrite(redLed,0);
  analogWrite(greenLed,0);
  analogWrite(blueLed,ledBright);
  }

//4 this gives out a cyan colour
if(rcd.value==0xFF10EF){
  remote_command="4 pressed";
  Serial.println(remote_command);
  analogWrite(redLed,0);
  analogWrite(greenLed,ledBright);
  analogWrite(blueLed,ledBright);
  }

//5 magenta colour
if(rcd.value==0xFFA25D){
  remote_command="5 pressed";
  Serial.println(remote_command);
  analogWrite(redLed,ledBright);
  analogWrite(greenLed,0);
  analogWrite(blueLed,ledBright);
  }

//6 Yellow colour
if(rcd.value==0xFFA25D){
  remote_command="6 pressed";
  Serial.println(remote_command);
  analogWrite(redLed,ledBright);
  analogWrite(greenLed,ledBright);
  analogWrite(blueLed,0);
  }

// to change the rate of the led brightness
//increase the brightness
if(rcd.value==0xFF9067){
  remote_command="Bright up";
  Serial.println(remote_command);
  ledBright*=0.65;
  if(ledBright>255){
    ledBright=255;
    }
  analogWrite(redLed,ledBright);
  analogWrite(greenLed,ledBright);
  analogWrite(blueLed,ledBright);
  }
//Decrease the brightness
if(rcd.value==0xFFE01F){
  remote_command="Dime Down";
  Serial.println(remote_command);
  ledBright=ledBright*0.45;
  if(ledBright<0){
    ledBright=0;
    }
  analogWrite(redLed,ledBright);
  analogWrite(greenLed,ledBright);
  analogWrite(blueLed,ledBright);
  }
}