iD24 Support

[Quodoso]

struct device_properties iD24;
iD24.name = "iD24";
iD24.usb_id = 0x000d;
iD24.mic_inputs = 2;
iD24.digital_inputs = 10;
iD24.outputs = 4;
iD24.digital_outputs = 14;
iD24.inserts = 2;
devices.push_back(iD24);

[TheOnlyJoey]

Thanks, added and in new pre-release https://github.com/TheOnlyJoey/MixiD/releases/tag/0.1.5

[dotr]

I have tried this and I can connect to the id24, adjust volume.
But there's an issue that if launch it with sudo, the interface gets taken over by the app and disappears from sound devices so no audio could be played on it.
Adding the provided udev rule doesn't work and it still asks for root.
I'm on CachyOS.

[TheOnlyJoey]

Unfortunately we have to un-tie the usb device from the kernel module and connect with exclusive access. Do the changes, and then Disconnect to re-attach back to the kernel driver. This is currently the only way that it would be possible to change the internal values on the interfaces. So this is expected behavior currently.

If you are using the README guide, make sure to check what the correct udev permission group is for your distro as some might not use "plugdev".

[dotr]

I managed to fix the udev on CachyOS, probably wider arch distros also would be good:

SUBSYSTEM=="usb", ATTR{idVendor}=="2708", MODE="0666", GROUP="audio"

[Stefsinn]

I would be down to get an ID24 to use the optical out in S/PDIF mode for an external amp. I'm new to reverse engineering but I'm happy to help with providing data to improve support. Just tell me what to do and I will provide it.

[TheOnlyJoey]

I would be down to get an ID24 to use the optical out in S/PDIF mode for an external amp. I'm new to reverse engineering but I'm happy to help with providing data to improve support. Just tell me what to do and I will provide it.

I have the option to test ADAT myself luckily, having at least an ADAT In on the iD14, so it would at least be possible for me to figure out the ADAT/SPDIF mode toggle for the input and maybe try to extrapolate what it would be on the output. But if you specifically want to test SDPIF support, all help is appreciated!

[24fpsDaVinci]

I would be down to get an ID24 to use the optical out in S/PDIF mode for an external amp. I'm new to reverse engineering but I'm happy to help with providing data to improve support. Just tell me what to do and I will provide it.

I have the option to test ADAT myself luckily, having at least an ADAT In on the iD14, so it would at least be possible for me to figure out the ADAT/SPDIF mode toggle for the input and maybe try to extrapolate what it would be on the output. But if you specifically want to test SDPIF support, all help is appreciated!

I'm thinking about purchasing the iD14, i couldnt find anywhere if the spdif toggle is currently supported?