WTH is this...
Shield/dock/whatever for MiSTeryNano project (nano tang 20k + M0S dock)
Ports on this is just MIDI-out and Joystick only (no level shifters for mice)
Resistors R1/R2 may need different values
100% THT so low cost to produce
WARNING
YMMV check before use, proceed with caution etc etc as I may have messed/missed something there...
Thanks
To Till for patiently answering my tech questions!
BOM
| Designator | Footprint | Quantity | Value |
|---|---|---|---|
| C1 | C_Disc_D5.0mm_W2.5mm_P5.00mm | 1 | 100n |
| J1, J3 | PinSocket_1x20_P2.54mm_Vertical | 2 | Conn_01x20_Socket |
| J2 | DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | 1 | Joy |
| J4 | PinSocket_2x06_P2.54mm_Horizontal | 1 | M0S |
| J5 | MIDI_DIN5 | 1 | MIDI OUT |
| R1, R2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 2 | 100 |
R1/R2, C1 and MIDI (out) port not requred if you don't use MIDI
11/12/2025 Updated with fabrication files for JLCPCB nanoshield.zip as gerber file, bom.csv as BOM, positions.csv as CPL files (all of them into 'production' folder) also note headers not visible on JLC's site - not big deal IMHO