I'm not sure if this is the same issue as some other comments/issues.
FIRMWARE_VERSION "0.7.0"
Hardware HTCC -AB01 v2
Preset CANADA (recommended) - MC_REGION_US915
I am not able to communicate with the repeater using the meshcore.io website 'repeater setup' or the 'console' or via PIO serial. Nothing seems to work, but the device does appear to be functioning. I am also not able to connect to the repeater using the Android app via LoRa.
Interestingly; I have flashed the firmware with the same settings to two Cubecells, and one adverts with my custom node ID and the other adverts with the auto generated node ID.
I have also noticed that the red LED sometimes stays on for an extended period after it sends " [TX] Complete".
Thanks
I'm not sure if this is the same issue as some other comments/issues.
FIRMWARE_VERSION "0.7.0"
Hardware HTCC -AB01 v2
Preset CANADA (recommended) - MC_REGION_US915
I am not able to communicate with the repeater using the meshcore.io website 'repeater setup' or the 'console' or via PIO serial. Nothing seems to work, but the device does appear to be functioning. I am also not able to connect to the repeater using the Android app via LoRa.
Interestingly; I have flashed the firmware with the same settings to two Cubecells, and one adverts with my custom node ID and the other adverts with the auto generated node ID.
I have also noticed that the red LED sometimes stays on for an extended period after it sends " [TX] Complete".
Thanks