[Report] StarMiner

[STSMiner1]

Which vendor?

USTARMINER

https://ustarminer.com/products/bitaxe-gamma-601-bitcoin-miner

What's the issue?

Selling counterfeit or non-genuine Bitaxe hardware

Evidence

Seller is selling modified hardware - ie Gamma 601 that is 12 volt with custom closed source firmware.

No source files for hardware and firmware.

Please also see the info via the link below.

bitaxeorg/ESP-Miner#1784

Confirm

• I'm reporting this in good faith, not to knock out a competitor

[skot]

@Tommyli2026 can you comment on this? As a reminder the bitaxe open source license requires you to publish the source for any changes to the hardware. Not doing this is illegal copyright infringement and is definitely grounds for removal from the LegitList.

[WantClue]

We should give them some time to respond, but the published information suggest they are selling modified versions that are not open source. This would resolve in a removal of the legitlist

[Tommyli2026]

Hi @skot and @WantClue

Thank you for your reminder. We fully respect the Bitaxe open-source license terms and community compliance rules.

We just finished the final work with a stable version. We are currently preparing the relevant files, and we will publish all required derivative source files to our public repository as soon as possible.

Best regards

[WantClue]

@Tommyli2026 you have till Wednesday next week to comply otherwise you will be removed

[awxhw]

Hi @skot and @WantClue
We’ve uploaded all derivative source files as scheduled. Could you help verify if everything is fully complete?
Public repository: https://github.com/awxhw/StarMiner
Schematic file link: https://github.com/awxhw/StarMiner/blob/master/sch/bitaxeGamma601a_V1.0_20260626.pdf

[WantClue]

@awxhw This is just a pdf for the schematics, the CERN-OHL-S license requires you to also publish the files for reproducing your changes. You need to upload your KiCad files to stay compliant. This is not enough

[awxhw]

@WantClue Thank you for the compliance feedback.We designed this board using PADS rather than KiCad. All editable native PADS design source files will be uploaded to the repository soon, fulfilling the CERN-OHL-S requirement for reproducible design sources.

[skot]

@WantClue Thank you for the compliance feedback.We designed this board using PADS rather than KiCad. All editable native PADS design source files (PCB & libraries) will be uploaded to the repository soon, fulfilling the CERN-OHL-S requirement for reproducible design sources.

@awxhw great, thank you for doing this. Keep us updated, please!

[awxhw]

@WantClue Thank you for the compliance feedback.We designed this board using PADS rather than KiCad. All editable native PADS design source files (PCB & libraries) will be uploaded to the repository soon, fulfilling the CERN-OHL-S requirement for reproducible design sources.

@awxhw great, thank you for doing this. Keep us updated, please!

@skot My pleasure. As requested, we’ve uploaded all native PADS design files (schematic, PCB and component libraries) to meet CERN-OHL-S compliance, with detailed file explanations in README_HARDWARE.md.
If you find any missing content or have other requirements, kindly leave a message here, and we will keep you updated accordingly.