Light randomly starts flashing after around a day

[codeandsolder]

I have a cheapo ilink ceiling light working over ESP32 Proxy, it works as expected except after a day or so it starts flashing rapidly until power cycled.
From troubleshooting so far it seems the issue is on the side of the lamp somewhere, I plant to just add a smart switch in series and only use BT for changing settings but thought I'd write the issue down just in case.
The issue happens the same way regardless of only using brightness changes or only ON/OFF.

[donandren]

yea those chinese lights are buggy, turn them off/on from hardware switch (or smart one) helps workaround the issue, till you are too tired to do it and change the light brand

[Creo2005]

I have a similar problem with 1 lamp out of 3. All are added to Home Assistant. But one after turning off (controlled by the Zigbee button) sometimes starts to turn on and off on its own after 1 second. Only turning off the power helps. I searched a little on the Internet, some lamps of this type can be reset by turning the power on/off 4-8 times. Maybe this can be done in these lamps too?