pybm3d not working properly on ubuntu

[paggers]

Working on a remote server running Ubuntu 16.04.3 LTS (GNU/Linux 4.4.0-79-generic x86_64) I am able to install pybm3d using pip, but once I run it on the example provided the result is all zeros (black image of same dimension).

I can provide more details about the system is required.

[timmeinhardt]

I just tested the example on a Linux machine with the same specifications and got a reasonable output. Is the direct result all zeros or only after saving the image? How is the input formatted (data type, normalized etc.)?

[timmeinhardt]

@paggers Did you manage to get it running?

[paggers]

I was running it locally on my Mac which worked fine, but I was unable to get good results and so I had to halt for a bit.

On a side note, not too long ago I've received a beta version of bm3d implemented in python from Prof. Foi of Tampere University, one of the people from the original group which published BM3D. Just wanted to give you the heads up.

If I get a chance I'll try to run it again on our linux machine, take care!

[debinz]

@paggers I also encounter the same question, , Can you please give me the beta version of bm3d implemented in python from Prof. Foi ? Thanks a lot!

[timmeinhardt]

@debinz Since I can not reproduce the Linux problems could you please give me some more info regarding your problem? In particular whether the direct result are all zeros or only after saving the image? How is the input formatted (data type, normalized etc.)?

[debinz]

@timmeinhardt OK! I have downloaded the source code, and used "$python setup build", "$python setup install" to setup the pybm3d. After that, I wrote a test.py to denoise a png picture:

the test.py is as follow:

import cv2
import pybm3d
noise_std_dev = 40

noisy_img = cv2.imread('./picture/000.png')
out = pybm3d.bm3d.bm3d(noisy_img, noise_std_dev)
cv2.imwrite('./picture/000_denoised.png',out)

Then I got the output picture:

I once thought that parts of the codes that 'convert the input image' and 'convert the output image' in bm3d.pyx were wrong because I found the style handling image vector in 'bm3d.cpp' was chnls first, then height, and width last. These parts of codes in bm3d.pyx are as follow:

    # convert the input image
    input_image.resize(input_array.size)
    pos = 0
    for i in range(input_array.shape[0]):
        for j in range(input_array.shape[1]):
            for k in range(input_array.shape[2]):
                input_image[pos] = input_array[i, j, k]
                pos +=1

    # convert the output image   
    pos = 0
    for i in range(input_array.shape[0]):
        for j in range(input_array.shape[1]):
            for k in range(input_array.shape[2]):
                output_array[i, j, k] = output_image[pos]
                pos +=1

So I changed these codes, and resetup it.

    # convert the input image
    input_image.resize(input_array.size)
    pos = 0
    for i in range(input_array.shape[2]):
        for j in range(input_array.shape[0]):
            for k in range(input_array.shape[1]):
                input_image[pos] = input_array[j, k, i]
                pos +=1

    # convert the output image 
    pos = 0
    for i in range(input_array.shape[2]):
        for j in range(input_array.shape[0]):
            for k in range(input_array.shape[1]):
                output_array[j, k, i] = output_image[pos]
                pos +=1

Then I got the output image:

Could you please give me some advice to deal with this issue? Thank you very much!

[leimingyu]

yes. I had the same issue when I tested on the astronaut image.

[Suraj-R]

same issue for me too:
printing out ----------

array([[[0, 0, 0],
[0, 0, 0],
[0, 0, 0],
...,
[0, 0, 0],
[0, 0, 0],
[0, 0, 0]],

   [[0, 0, 0],
    [0, 0, 0],
    [0, 0, 0],
    ...,
    [0, 0, 0],
    [0, 0, 0],
    [0, 0, 0]],

   [[0, 0, 0],
    [0, 0, 0],
    [0, 0, 0],
    ...,
    [0, 0, 0],
    [0, 0, 0],
    [0, 0, 0]],

   ...,

   [[0, 0, 0],
    [0, 0, 0],
    [0, 0, 0],
    ...,
    [0, 0, 0],
    [0, 0, 0],
    [0, 0, 0]],

   [[0, 0, 0],
    [0, 0, 0],
    [0, 0, 0],
    ...,
    [0, 0, 0],
    [0, 0, 0],
    [0, 0, 0]],

   [[0, 0, 0],
    [0, 0, 0],
    [0, 0, 0],
    ...,
    [0, 0, 0],
    [0, 0, 0],
    [0, 0, 0]]], dtype=uint8)

Reporting same problem on remote machine with ubuntu 16.04, but on my local ubuntu 18.04 it works without problems.

[491506870]

@timmeinhardt hii met the same problem with them, would you mind fixing it? i think this package is very helpful

[TalHadad]

Hi, I'm using Ubuntu 18.04, Python 3.6 and I had the same issue.
@Dexerius how did you saved the image? I tried with PIL and cv2, they both produced the same black image.

My code:

noise_std_dev = 40
img = skimage.data.astronaut()
noise = np.random.normal(scale=noise_std_dev, size=img.shape).astype(img.dtype)

noisy_img = img + noise
im = Image.fromarray(noisy_img, 'RGB')
im.save('noisy_img.png')

out = pybm3d.bm3d.bm3d(noisy_img, noise_std_dev)
print(out)

cv2.imwrite('out_cv2.png', out)

im = Image.fromarray(out, 'RGB')
im.save('out_PIL.png')

Output:

[[[0 0 0]
[0 0 0]
[0 0 0]
...
...
[0 0 0]
[0 0 0]
[0 0 0]]]
PSNR of noisy image: 8.786579608939476
PSNR of reconstructed image: 5.184803539791517

Has anyone solved the problem?

[WKrauze]

The same problem on Linux Manjaro 18.0.4 and Python=3.6. Depending on the input data type, the output is either array of zeros or array with erronous values like in example shown by @leimingyu.
Implemented PRs #13 and #14, however the issue remains.