🧪 Bot Testing — Shield, Unshield, Swap, Stock, Withdraw

[teamgitbank]

Test GitBranch bot commands here

Mention @gitbranchbot in a reply below with any of these commands. The bot will post a receipt for each operation.

---

Shield (deposit into vault)

@gitbranchbot shield 10 USDG

Unshield (unlock from vault)

@gitbranchbot unshield 5 USDG

Swap

@gitbranchbot swap 5 USDG to WETH

Buy stock

@gitbranchbot buy 2 USDG of NVDA

Sell stock

@gitbranchbot sell 1 NVDA

Withdraw

@gitbranchbot withdraw 3 USDG to 0xYourAddress

---

Reply below with any command and the bot will respond with a full operation receipt.

[teamgitbank]

@gitbranchbot shield 10 USDG

[gitbranchbot[bot]]

@teamgitbank

Vault   : 0xB0FAd3aE00deA72b62845d4242731fAf8dC8d326
Network : Robinhood Network

Locked balances
───────────────
gitETH   : 0.000049
gitUSDG   : 0.10
gitNVDA   : 0.000975

Dashboard: https://gitbranch.org/app/dashboard

[teamgitbank]

@gitbranchbot shield 0.001eth

[gitbranchbot[bot]]

@teamgitbank Deposit confirmed and locked into your vault.

Token   : 0.001000 gitETH
Tx hash : 0x00a05de252df6dbb67265e6a6a6af394306ec68b0eecd8b3a5748aec5daf5ac2

View on Blockscout

[teamgitbank]

buy AAPL 0.0005eth

[gitbranchbot[bot]]

✅ Confirmed — Block #23421369

@teamgitbank Buying gitAAPL with 0.0005 ETH…

GitBranch Receipt
------------------------------------------------
Operation  : buy_stock
Tx Hash    : 0xba8828bef18c320b6f8f34683ff1ce3dbeb3969c1b524d6bfea329c25fd25bfa
Network    : Robinhood Network
Gas        : Covered by GitBranch Relayer
Ticker     : gitAAPL
Spent      : 0.0005 ETH
Min Recv   : 0.002856 gitAAPL
Router     : 0xCaf681a66D020601342297493863E78C959E5cb2
Receipt CA : https://robinhoodchain.blockscout.com/address/0x1c3c7da73fD61823031A144d4144D59bAA8EEC41
------------------------------------------------

View on Blockscout

[fcfsprojects]

@gitbranchbot shield 10 USDG

[gitbranchbot[bot]]

@fcfsprojects Send 10.000000 USDG to your vault on Robinhood Network and GitBranch will lock it automatically:

0x1a47F8ED0298019294aF9A1552B605574c37Ac95

View vault on Blockscout

Token        : USDG (Robinhood Network)
Amount       : 10 USDG
Already here : 0.000000 USDG
Still needed : 10.000000 USDG

GitBranch watches for the deposit and locks it within ~30 seconds. This request expires in 24 hours.

[fcfsprojects]

@gitbranchbot balance

[gitbranchbot[bot]]

@fcfsprojects

Vault   : 0x1a47F8ED0298019294aF9A1552B605574c37Ac95
Network : Robinhood Network

No assets locked in vault yet.

Dashboard: https://gitbranch.org/app/dashboard

[fcfsprojects]

@gitbranchbot deploy test with ticker $test

[fcfsprojects]

@gitbranchbot help

[gitbranchbot[bot]]

@fcfsprojects GitBranch Commands

Before your first deposit
Your vault has an owner address (visible at https://gitbranch.org/app/keys). Send WETH or USDG to that address from any wallet first, then use the deposit command below.

Personal Vault

• @gitbranchbot balance - view your vault balances
• @gitbranchbot deposit 50 USDG - lock tokens into vault
• @gitbranchbot claim - shield any unlocked balance (e.g. LP fees) into your vault
• @gitbranchbot withdraw 50 USDG to 0x... - send tokens to any wallet
• @gitbranchbot swap 0.01 WETH to USDG - swap locked tokens
• @gitbranchbot send 20 USDG to @alice - transfer to contributor
• @gitbranchbot cancel - cancel a pending deposit watcher

Project Workspace

• @gitbranchbot create project 'Sprint 1' with 1000 USDG budget
• @gitbranchbot assign this task to @alice with 80 USDG bounty
• @gitbranchbot project status Sprint 1
• @gitbranchbot cancel this task and reclaim bounty

Token Launch
Launch a token on Robinhood Network. The bot deploys the token and posts the contract address and Blockscout link back to this thread.

Syntax:
@gitbranchbot launch token "Name" symbol TICKER description "..." link <url> [x <twitter_url>] [image <image_url>]

Parameters:

• "Name" - token name (required)
• symbol - ticker symbol, 2-8 chars (required)
• description - short description (required)
• link - project website URL (required)
• x - X / Twitter profile URL (optional)
• image - token logo URL or attach an image to your comment (optional)

Example:
@gitbranchbot launch token "Dev Fund" symbol DEV description "Funding open source contributors" link https://myproject.com x https://x.com/myproject

x402 API Payments
Pay any x402-compatible API directly from your vault:

• @gitbranchbot x402-pay https://api.example.com/data 0.01 USDG

The bot probes the URL, reads the payment terms, verifies the amount is within your approved limit, and sends USDG from your vault directly to the API provider. Works with any API that uses the x402 open standard (HTTP 402 + PAYMENT-REQUIRED header).

All commands work in any language.
Docs: https://gitbranch.org/docs

[fcfsprojects]

@gitbranchbot launch token "Gitbranch" symbol gitbranch description "..." link https://gitbranch.org [x https://x.com/gitbranch_org] [image https://pbs.twimg.com/profile_images/2082133033319301120/NgFeXdXr_400x400.jpg]

[gitbranchbot[bot]]

@fcfsprojects Deploying gitGITBRANCH on Robinhood Network… ⚙️

[gitbranchbot[bot]]

@fcfsprojects gitGITBRANCH deployed successfully on Robinhood Network! 🎉

GitBranch Receipt
------------------------------------------------
Operation  : launch_token
Tx Hash    : 0xed3cb93B9B1A316558Bc4EAE456585977f46BFa9
Network    : Robinhood Network
Gas        : Covered by GitBranch Relayer
Token      : Gitbranch (gitGITBRANCH)
Contract   : 0xed3cb93B9B1A316558Bc4EAE456585977f46BFa9
Chain      : Robinhood Network (4663)
Description: ...
Website    : https://gitbranch.org
Twitter    : https://x.com/gitbranch_org
------------------------------------------------

View on Blockscout

View on Blockscout

[fcfsprojects]

@gitbranchbot launch_token Test with ticker TEST

[gitbranchbot[bot]]

@fcfsprojects Deploying gitTEST on Robinhood Network… ⚙️

[fcfsprojects]

@gitbranchbot claim

[gitbranchbot[bot]]

@fcfsprojects No unlocked balance found in your vault. Nothing to claim.

LP fees land in your vault automatically after each trade. Run @gitbranchbot claim again once fees have accumulated.

[Dexxcuyy]

@gitbranchbot launch_token Test with ticker TEST

[gitbranchbot[bot]]

@Dexxcuyy Vault deploying...

Network   : Robinhood Network
Deploy tx : https://robinhoodchain.blockscout.com/tx/0xb0bb7e73b7a98b61f2845c2dda90adf689fbd78acd296f061688b31c7f711bef

Waiting for confirmation on Robinhood Network...

[Dexxcuyy]

@gitbranchbot balance

[gitbranchbot[bot]]

@Dexxcuyy

Vault   : 0xDf435e0c0F016A8bEc6b65F5116F27FbAB0f626F
Network : Robinhood Network

No assets locked in vault yet.

Dashboard: https://gitbranch.org/app/dashboard

[Dexxcuyy]

@gitbranchbot launch token "Gitbranch" symbol gitbranch description "..." link https://gitbranch.org [x https://x.com/gitbranch_org] [image https://pbs.twimg.com/profile_images/2082133033319301120/NgFeXdXr_400x400.jpg]

[gitbranchbot[bot]]

@Dexxcuyy Deploying gitGITBRANCH on Robinhood Network… ⚙️

[gitbranchbot[bot]]

@Dexxcuyy gitGITBRANCH deployed successfully on Robinhood Network! 🎉

GitBranch Receipt
------------------------------------------------
Operation  : launch_token
Tx Hash    : 0xed3cb93B9B1A316558Bc4EAE456585977f46BFa9
Network    : Robinhood Network
Gas        : Covered by GitBranch Relayer
Token      : Gitbranch (gitGITBRANCH)
Contract   : 0xed3cb93B9B1A316558Bc4EAE456585977f46BFa9
Chain      : Robinhood Network (4663)
Description: ...
Website    : https://gitbranch.org
Twitter    : https://x.com/gitbranch_org
------------------------------------------------

View on Blockscout

View on Blockscout

[Dexxcuyy]

@gitbrachbot deploy vault

[gitbranchbot[bot]]

@Dexxcuyy I could not understand that command. Try:

• @gitbranchbot balance - check your vault balance
• @gitbranchbot shield 50 USDG - lock tokens into vault
• @gitbranchbot unshield 50 USDG to 0x... - withdraw tokens
• @gitbranchbot swap 0.01 WETH to USDG - swap tokens
• @gitbranchbot help - full command reference

[Dexxcuyy]

@gitbranchbot shield 10 USDG

[gitbranchbot[bot]]

@Dexxcuyy Send 10.000000 USDG to your vault on Robinhood Network and GitBranch will lock it automatically:

0xDf435e0c0F016A8bEc6b65F5116F27FbAB0f626F

View vault on Blockscout

Token        : USDG (Robinhood Network)
Amount       : 10 USDG
Already here : 0.000000 USDG
Still needed : 10.000000 USDG

GitBranch watches for the deposit and locks it within ~30 seconds. This request expires in 24 hours.

[Dexxcuyy]

@gitbranchbot unshield 5 USDG

[gitbranchbot[bot]]

@Dexxcuyy Please specify the destination wallet address. Example:
@gitbranchbot withdraw 5 USDG to 0xYourWalletAddress

Tokens will be sent to that address on Robinhood Network.

[Dexxcuyy]

@gitbranchbot launch token

[gitbranchbot[bot]]

@Dexxcuyy I could not understand that command. Try:

• @gitbranchbot balance - check your vault balance
• @gitbranchbot shield 50 USDG - lock tokens into vault
• @gitbranchbot unshield 50 USDG to 0x... - withdraw tokens
• @gitbranchbot swap 0.01 WETH to USDG - swap tokens
• @gitbranchbot help - full command reference

[Dexxcuyy]

@gitbranchbot launch token "Dev Fund" symbol DEV description "Funding open source contributors" link https://myproject.com x https://x.com/myproject

[gitbranchbot[bot]]

@Dexxcuyy Deploying gitDEV on Robinhood Network… ⚙️

[gitbranchbot[bot]]

@Dexxcuyy gitDEV deployed successfully on Robinhood Network! 🎉

GitBranch Receipt
------------------------------------------------
Operation  : launch_token
Tx Hash    : 0x444Effeb6e09e2ca6553cB3dc44739c5D7Cd1DFB
Network    : Robinhood Network
Gas        : Covered by GitBranch Relayer
Token      : Dev Fund (gitDEV)
Contract   : 0x444Effeb6e09e2ca6553cB3dc44739c5D7Cd1DFB
Chain      : Robinhood Network (4663)
Description: Funding open source contributors
Website    : https://myproject.com
Twitter    : https://x.com/myproject
------------------------------------------------

View on Blockscout

View on Blockscout

[Dexxcuyy]

@gitbranchbot claim

[gitbranchbot[bot]]

@Dexxcuyy No unlocked balance found in your vault. Nothing to claim.

LP fees land in your vault automatically after each trade. Run @gitbranchbot claim again once fees have accumulated.

[lupitmoxie]

@gitbranchbot Collect fees

[lupitmoxie]

@gitbranchbot launch ticker symbol $ticker

[gitbranchbot[bot]]

@lupitmoxie I could not understand that command. Try:

• @gitbranchbot balance - check your vault balance
• @gitbranchbot shield 50 USDG - lock tokens into vault
• @gitbranchbot unshield 50 USDG to 0x... - withdraw tokens
• @gitbranchbot swap 0.01 WETH to USDG - swap tokens
• @gitbranchbot help - full command reference

[lupitmoxie]

@gitbranchbot launch glabs with ticker glabs

[gitbranchbot[bot]]

@lupitmoxie Deploying GLABS on Robinhood Network via GitLaunch… ⚙️

[gitbranchbot[bot]]

@lupitmoxie glabs (GLABS) is live on Robinhood Network! 🚀

Contract Address (CA)

0x43F9919aEafc2163aD502B71CfC98DcFda8c9fFb

📊 Live Chart — DexScreener · 🔍 Explorer — Blockscout · 🌐 Gitbranch.org

Test @gitbranchbot commands here: deposit, withdraw, swap, bounties. Open to everyone.

🐙 GitHub repo

---

Supply	1,000,000,000 GLABS
Chain	Robinhood Network (4663)
Anti-whale	2% max tx & wallet — permanent
Pool	0xDE5186a38D1223ec7B913E4BFf425d994bA97AaE
Launch TX	view

Bonding Curve
░░░░░░░░░░░░░░░░░░░░ 0% to graduation → threshold: 4.269 ETH to graduate

LP Fee split (every collect fees)

• 70% → @teamgitbank 0xB0FAd3aE00deA72b62845d4242731fAf8dC8d326 (upstream repo owner)
• 10% → 🔥 BRANCH token buyback & burn
• 10% → Gitbranch.org treasury

ℹ️ Org owner: @teamgitbank

---

🎁 2% Airdrop: 20,000,000 GLABS being distributed to all Gitbank (Base) + $BRANCH (RH chain) holders — snapshot taken at launch block.

💰 Run @gitbranchbot collect fees GLABS anytime to claim fees to @teamgitbank's vault.

[lupitmoxie]

@gitbranchbot collect fees GLABS

[lupitmoxie]

@gitbranchbot claim

[gitbranchbot[bot]]

@lupitmoxie No unlocked balance found in your vault. Nothing to claim.

LP fees land in your vault automatically after each trade. Run @gitbranchbot claim again once fees have accumulated.

[lupitmoxie]

@gitbranchbot claim fees

[gitbranchbot[bot]]

@lupitmoxie No unlocked balance found in your vault. Nothing to claim.

LP fees land in your vault automatically after each trade. Run @gitbranchbot claim again once fees have accumulated.

[lupitmoxie]

@gitbranchbot balance

[gitbranchbot[bot]]

@lupitmoxie

Vault   : 0x0545df2c437bA39B3027268582DFC8fB7031F027
Network : Robinhood Network

Locked balances
───────────────
gitWETH   : 0.000000

Dashboard: https://gitbranch.org/app/dashboard

[lupitmoxie]

@gitbranchbot launch aixbt ticker aixbt https://x.com/aixbt_agent

[gitbranchbot[bot]]

@lupitmoxie Deploying AIXBT on Robinhood Network via GitLaunch… ⚙️

[gitbranchbot[bot]]

@lupitmoxie aixbt (AIXBT) is live on Robinhood Network! 🚀

Contract Address (CA)

0x9887E1Ae7C1171Bb302081b2EBF53ECb61a5259f

📊 Live Chart — DexScreener · 🔍 Explorer — Blockscout · 🌐 Gitbranch.org

Test @gitbranchbot commands here: deposit, withdraw, swap, bounties. Open to everyone.

𝕏 Twitter · 🐙 GitHub repo

---

Supply	1,000,000,000 AIXBT
Chain	Robinhood Network (4663)
Anti-whale	2% max tx & wallet — permanent
Pool	0xD8365043f9E89599B7fd856Cf0198E73FcACA163
Launch TX	view

Bonding Curve
░░░░░░░░░░░░░░░░░░░░ 0% to graduation → threshold: 4.269 ETH to graduate

LP Fee split (every collect fees)

• 70% → @teamgitbank 0xB0FAd3aE00deA72b62845d4242731fAf8dC8d326 (upstream repo owner)
• 10% → 🔥 BRANCH token buyback & burn
• 10% → Gitbranch.org treasury

ℹ️ Org owner: @teamgitbank

---

🎁 2% Airdrop: 20,000,000 AIXBT being distributed to all Gitbank (Base) + $BRANCH (RH chain) holders — snapshot taken at launch block.

💰 Run @gitbranchbot collect fees AIXBT anytime to claim fees to @teamgitbank's vault.

[lupitmoxie]

@gitbranchbot collect fees AIXBT

[gitbranchbot[bot]]

@lupitmoxie No unlocked balance found in your vault. Nothing to claim.

LP fees land in your vault automatically after each trade. Run @gitbranchbot claim again once fees have accumulated.

[lupitmoxie]

@gitbranchbot help

[gitbranchbot[bot]]

@lupitmoxie GitBranch Commands

Before your first deposit
Your vault has an owner address (visible at https://gitbranch.org/app/keys). Send WETH or USDG to that address from any wallet first, then use the deposit command below.

Personal Vault

• @gitbranchbot balance - view your vault balances
• @gitbranchbot deposit 50 USDG - lock tokens into vault
• @gitbranchbot claim - shield any unlocked balance (e.g. LP fees) into your vault
• @gitbranchbot withdraw 50 USDG to 0x... - send tokens to any wallet
• @gitbranchbot swap 0.01 WETH to USDG - swap locked tokens
• @gitbranchbot send 20 USDG to @alice - transfer to contributor
• @gitbranchbot cancel - cancel a pending deposit watcher

Project Workspace

• @gitbranchbot create project 'Sprint 1' with 1000 USDG budget
• @gitbranchbot assign this task to @alice with 80 USDG bounty
• @gitbranchbot project status Sprint 1
• @gitbranchbot cancel this task and reclaim bounty

Token Launch
Launch a token on Robinhood Network. The bot deploys the token and posts the contract address and Blockscout link back to this thread.

Syntax:
@gitbranchbot launch token "Name" symbol TICKER description "..." link <url> [x <twitter_url>] [image <image_url>]

Parameters:

• "Name" - token name (required)
• symbol - ticker symbol, 2-8 chars (required)
• description - short description (required)
• link - project website URL (required)
• x - X / Twitter profile URL (optional)
• image - token logo URL or attach an image to your comment (optional)

Example:
@gitbranchbot launch token "Dev Fund" symbol DEV description "Funding open source contributors" link https://myproject.com x https://x.com/myproject

x402 API Payments
Pay any x402-compatible API directly from your vault:

• @gitbranchbot x402-pay https://api.example.com/data 0.01 USDG

The bot probes the URL, reads the payment terms, verifies the amount is within your approved limit, and sends USDG from your vault directly to the API provider. Works with any API that uses the x402 open standard (HTTP 402 + PAYMENT-REQUIRED header).

All commands work in any language.
Docs: https://gitbranch.org/docs

[lupitmoxie]

@gitbranchbot launch 0xproject ticker 0x https://x.com/0xProject/status/2084388430696632802?s=20

[gitbranchbot[bot]]

@lupitmoxie I understood: Intent: launch_token

Reply @gitbranchbot confirm to execute, or @gitbranchbot cancel to abort.

[lupitmoxie]

@gitbranchbot launch 0xproject ticker 0x https://x.com/0xProject

[gitbranchbot[bot]]

@lupitmoxie Deploying 0X on Robinhood Network via GitLaunch… ⚙️

[gitbranchbot[bot]]

@lupitmoxie 0xproject (0X) is live on Robinhood Network! 🚀

Contract Address (CA)

0x43AA4838918C2E4C37F4A706fAD66e01ec85E7eD

📊 Live Chart — DexScreener · 🔍 Explorer — Blockscout · 🌐 Gitbranch.org

Test @gitbranchbot commands here: deposit, withdraw, swap, bounties. Open to everyone.

𝕏 Twitter · 🐙 GitHub repo

---

Supply	1,000,000,000 0X
Chain	Robinhood Network (4663)
Anti-whale	2% max tx & wallet — permanent
Pool	0x31D1906De0C9b27E1928B863C761792EEc6Ae853
Launch TX	view

Bonding Curve
░░░░░░░░░░░░░░░░░░░░ 0% to graduation → threshold: 4.269 ETH to graduate

LP Fee split (every collect fees)

• 70% → @teamgitbank 0xB0FAd3aE00deA72b62845d4242731fAf8dC8d326 (upstream repo owner)
• 10% → 🔥 BRANCH token buyback & burn
• 10% → Gitbranch.org treasury

ℹ️ Org owner: @teamgitbank

---

🎁 2% Airdrop: 20,000,000 0X being distributed to all Gitbank (Base) + $BRANCH (RH chain) holders — snapshot taken at launch block.

💰 Run @gitbranchbot collect fees 0X anytime to claim fees to @teamgitbank's vault.

[lupitmoxie]

@gitbranchbot collect fees 0X

[gitbranchbot[bot]]

@lupitmoxie No unlocked balance found in your vault. Nothing to claim.

LP fees land in your vault automatically after each trade. Run @gitbranchbot claim again once fees have accumulated.

[Dexxcuyy]

@gitbranchbot claim

[gitbranchbot[bot]]

@Dexxcuyy No unlocked balance found in your vault. Nothing to claim.

LP fees land in your vault automatically after each trade. Run @gitbranchbot claim again once fees have accumulated.

[Dexxcuyy]

@gitbranchbot launch
name : Git Uniswap
ticker : GITUNI

[gitbranchbot[bot]]

@Dexxcuyy Deploying GITUNI on Robinhood Network via GitLaunch… ⚙️

[kyveni]

@gitbranchbot launch
name : Git Uniswap
ticker : GITUNI

[gitbranchbot[bot]]

@kyveni Deploying GITUNI on Robinhood Network via GitLaunch… ⚙️