Error when initially receiving mcu json

[cpunt]

An error happens when initially connect to the mcu-bridge as we intercept the json string at a random point. Should we drop the initial json string sent over the bridge?

[ERROR 14:35:22] ./services/mcu_bridge.lua:81: mcu_bridge - UART Reader: Error decoding UART JSON data: Expected value but found invalid token at character 430 "{"power/charger/internal/vin":24631,"power/charger/internal/vsys":24642,"power/charger/internal/iin":566,"power/charger/internal/system/charger_enabled":0,"power/charger/internal/system/mppt_en_pin":1,"power/charger/internal/system/equalize_req":0,"power/charger/internal/system/drvcc_good":1,"power/charger/internal/system/cell_count_error":0,"power/charger/internal/system/ok_to_charge":1,"power/charger/internal/system/no_rt":down":0,"power/charger/internal/snal/system/vin_gt_vbat":1,"power/stem/intvcc_gt_4p3v":1,"power/chp8v":1,"power/charger/internal/status/iin_limited":0,"power/charger/internal/status/uvcl_active":0,"power/charger/internal/status/cc_phase":0,"power/charger/internal/status/cv_phase":0,"power/charger/internal/missing":1,"power/charger/interner/charger/internal/state/c_over_/state/timer_term":0,"power/charger/internal/state/ntc_pause":0,"power/charger/internal/state/precharge":0,"power/charger/internal/state/cccv":0,"power/charger/internal/state/absorb":0,"power/charger/internal/state/equalize":0,"power/charger/internal/state/suspended":0}"

[lePereT]

This is expected with the first line of JSON read from a stream. The first line of JSON should be discarded and decoding should not be attempted. @rslater-cs might care to fix in devicecode-lua!

[cpunt]

To add onto this, I’m seeing some message paths that don’t look correct and aren’t on the Google Sheet.

mcu.power.charger.internalernal.state.timer_term
mcu.power.ate.ntc_pause
mcu.power.charger.ir.internal.state.cccv
mcu.power.cr.internal.state.equalize
mcu.power.charger.internal.state.tate.bat_missing