From dd5a3bb2c7b827bf7c4b012a0d5e1670d6cb387c Mon Sep 17 00:00:00 2001
From: Hermann Seib <office@hermannseib.com>
Date: Wed, 27 Aug 2025 15:08:28 +0200
Subject: [PATCH] Fixed a lot of cubes

---
 backspace.scad  | 2 +-
 capslock.scad   | 2 +-
 enter.scad      | 6 +++---
 key-double.scad | 2 +-
 key-std.scad    | 2 +-
 num-enter.scad  | 2 +-
 shift.scad      | 2 +-
 shift_wide.scad | 2 +-
 space.scad      | 2 +-
 9 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/backspace.scad b/backspace.scad
index aff209e..f0664e4 100644
--- a/backspace.scad
+++ b/backspace.scad
@@ -114,7 +114,7 @@ module shaft(){
 			translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) cylinder(r=SHAFT_SPRING_HOLDER_WIDTH/2,h=100,$fs=0.3);
 			intersection(){
 				translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT]) cylinder(r=SHAFT_SPRING_HOLDER_NIPPLE_RADIUS,h=100,$fs=0.3);
-				translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube(100,100,100);
+				translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube([100,100,100]);
 			}
 			intersection(){
 				difference(){
diff --git a/capslock.scad b/capslock.scad
index 250f11f..1ed9d26 100644
--- a/capslock.scad
+++ b/capslock.scad
@@ -114,7 +114,7 @@ module shaft(){
 			translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) cylinder(r=SHAFT_SPRING_HOLDER_WIDTH/2,h=100,$fs=0.3);
 			intersection(){
 				translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT]) cylinder(r=SHAFT_SPRING_HOLDER_NIPPLE_RADIUS,h=100,$fs=0.3);
-				translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube(100,100,100);
+				translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube([100,100,100]);
 			}
 			intersection(){
 				difference(){
diff --git a/enter.scad b/enter.scad
index 3070df4..ccfb2c2 100644
--- a/enter.scad
+++ b/enter.scad
@@ -132,7 +132,7 @@ module shaft(){
 			translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) cylinder(r=SHAFT_SPRING_HOLDER_WIDTH/2,h=100,$fs=0.3);
 			intersection(){
 				translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT]) cylinder(r=SHAFT_SPRING_HOLDER_NIPPLE_RADIUS,h=100,$fs=0.3);
-				translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube(100,100,100);
+				translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube([100,100,100]);
 			}
 			intersection(){
 				difference(){
@@ -180,13 +180,13 @@ difference(){
 			translate([SHAFT_OFF_X,SHAFT_OFF_Y]) guard();
 			difference(){
 				translate([BLIND_SHAFT_OFF_X,BLIND_SHAFT_OFF_Y]) guard();
-				translate([SHAFT_OFF_X-OUTER_GUARD_RADIUS-100,-50,SLOPE_Z-100]) cube(100,100,100);
+				translate([SHAFT_OFF_X-OUTER_GUARD_RADIUS-100,-50,SLOPE_Z-100]) cube([100,100,100]);
 			}
 			difference(){
 				translate([0,SHAFT_OFF_Y]) cube([100,STRUT_THICKNESS,100],center=true);
 				translate([SHAFT_OFF_X,SHAFT_OFF_Y]) cube([2*OUTER_GUARD_RADIUS-WallThickness,100,100],center=true);
 				translate([BLIND_SHAFT_OFF_X,BLIND_SHAFT_OFF_Y]) cube([2*OUTER_GUARD_RADIUS-WallThickness,100,100],center=true);
-				translate([SHAFT_OFF_X-OUTER_GUARD_RADIUS-100,-50,SLOPE_Z-100]) cube(100,100,100);
+				translate([SHAFT_OFF_X-OUTER_GUARD_RADIUS-100,-50,SLOPE_Z-100]) cube([100,100,100]);
 			}
 		}
 	}
diff --git a/key-double.scad b/key-double.scad
index 7469c39..da7d70e 100644
--- a/key-double.scad
+++ b/key-double.scad
@@ -114,7 +114,7 @@ module shaft(){
 			translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) cylinder(r=SHAFT_SPRING_HOLDER_WIDTH/2,h=100,$fs=0.3);
 			intersection(){
 				translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT]) cylinder(r=SHAFT_SPRING_HOLDER_NIPPLE_RADIUS,h=100,$fs=0.3);
-				translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube(100,100,100);
+				translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube([100,100,100]);
 			}
 			intersection(){
 				difference(){
diff --git a/key-std.scad b/key-std.scad
index 8ce4b0a..8554b56 100644
--- a/key-std.scad
+++ b/key-std.scad
@@ -117,7 +117,7 @@ module shaft(){
 			translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) cylinder(r=SHAFT_SPRING_HOLDER_WIDTH/2,h=100,$fs=0.3);
 			intersection(){
 				translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT]) cylinder(r=SHAFT_SPRING_HOLDER_NIPPLE_RADIUS,h=100,$fs=0.3);
-				translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube(100,100,100);
+				translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube([100,100,100]);
 			}
 			intersection(){
 				difference(){
diff --git a/num-enter.scad b/num-enter.scad
index 0977a2c..4d0200b 100644
--- a/num-enter.scad
+++ b/num-enter.scad
@@ -117,7 +117,7 @@ module shaft(){
 			translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) cylinder(r=SHAFT_SPRING_HOLDER_WIDTH/2,h=100,$fs=0.3);
 			intersection(){
 				translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT]) cylinder(r=SHAFT_SPRING_HOLDER_NIPPLE_RADIUS,h=100,$fs=0.3);
-				translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube(100,100,100);
+				translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube([100,100,100]);
 			}
 			intersection(){
 				difference(){
diff --git a/shift.scad b/shift.scad
index eb3693e..27d5439 100644
--- a/shift.scad
+++ b/shift.scad
@@ -106,7 +106,7 @@ module shaft(){
 			translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) cylinder(r=SHAFT_SPRING_HOLDER_WIDTH/2,h=100,$fs=0.3);
 			intersection(){
 				translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT]) cylinder(r=SHAFT_SPRING_HOLDER_NIPPLE_RADIUS,h=100,$fs=0.3);
-				translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube(100,100,100);
+				translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube([100,100,100]);
 			}
 			intersection(){
 				difference(){
diff --git a/shift_wide.scad b/shift_wide.scad
index 5b0efc6..42ac571 100644
--- a/shift_wide.scad
+++ b/shift_wide.scad
@@ -114,7 +114,7 @@ module shaft(){
 			translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) cylinder(r=SHAFT_SPRING_HOLDER_WIDTH/2,h=100,$fs=0.3);
 			intersection(){
 				translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT]) cylinder(r=SHAFT_SPRING_HOLDER_NIPPLE_RADIUS,h=100,$fs=0.3);
-				translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube(100,100,100);
+				translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube([100,100,100]);
 			}
 			intersection(){
 				difference(){
diff --git a/space.scad b/space.scad
index 51a42fc..4fff91a 100644
--- a/space.scad
+++ b/space.scad
@@ -108,7 +108,7 @@ module shaft(){
 			translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) cylinder(r=SHAFT_SPRING_HOLDER_WIDTH/2,h=200,$fs=0.3);
 			intersection(){
 				translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT]) cylinder(r=SHAFT_SPRING_HOLDER_NIPPLE_RADIUS,h=200,$fs=0.3);
-				translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-100,-100,0]) cube(200,200,200);
+				translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-100,-100,0]) cube([200,200,200]);
 			}
 			intersection(){
 				difference(){