Epever Solar Readme

[MStapelfeldt]

Hi, I was reading and testing your component and I struggle a bit with the description and how to wire correctly.
connected PIN 3 (or 4) to A+, PIN 5 (or 6) to B+
I think it's A+ and B- but normally Pin4 (Blue wire) should be connected to B and Pin6 (Green Wire) is A. At least when connected to Max 485.
Also Max 485 needs RX to RX and TX to TX, (Tested with https://github.com/softwarecrash/EPEver2MQTT and wiring https://github.com/softwarecrash/EPEver2MQTT/wiki/Wireing). Could it be possible to extend the wiring picture and include rj45 and ESP device or verify the pins? I tried ESP32 lolin d32 and D1 Mini, both without recieving data with your module.

Last but not least, I would be happy if it would be possible to use MAX 485 with ESPhome and need a Pin for DE/RE.