Motion detected every 10 seconds

[zsolty87dk]

With Version 0.12.0, motion detection triggers every 10 seconds, even with motion detection being off. I tried to troubleshoot with Claude and it suggest the following to look at:
"the detection_reset_task attribute in WyomingSatelliteMotionDetectedSensor was removed from the implementation in the latest update, and the app's status heartbeat includes motion_detected: true unconditionally regardless of the motion detection setting in the app"

Also in the change log, it mentions that camera stream is now available, but I can't find it within the available sensors.

Thank you.

Br,
Zsolt

[msp1974]

Hi. I cannot recreate that issue. Can you give me some more info.

What device is this on?
I am assuming you are looking at the last motion sensor?
Can you provide some screenshots showing this?

You Claude info is not really of any help as the app had a lot of changes to how this works and therefore the removal of the code stated is deliberate and correct.

[zsolty87dk]

Hi.

I have the companion app installed on a Samsung Galaxy A9+ tablet, and using the previous version of the companion app, I didn't have problem with the motion detection.

Here is a quick recording of the last motion and Motion sensors behavior:

Recording.2026-06-16.111744.mp4

[msp1974]

Have you got motion sensitivity turned up too high? It is much more sensitive now so prob need to de down around 70.

To see the detections on camera stream access the new quick action menu (2 finger swipe up from bottom) -> settings and camera stream.

Steuggling to understand how it can be detecting when off too. Can you confirm that.

[zsolty87dk]

Actually, I had tried to go down on sensitivity as low as 50, and still had the same behavior and yes, even with motion detection off.

Now I tried to go even lower than 50, and what I noticed is that just below 45, it stops the detection every 10 seconds. I have not yet tried if with motion sensitivity 40 would even detect positive/real motion or not. Will do that later today.

The motion detection is still off though and as soon as I go above 44, the 10 seconds interval detection is back:

[msp1974]

Def view the camera stream in settings so you can see what motion is being detected. It maybe something in its view you dont expect.

I have a A11 so will test on that and see what i find.