Anope 2.0.20 does not start following update from the 2.0.19.

[Laurent6540]

Hello,

I updated Anope for the first time from version 20.19 to 2.0.20.

Upon startup in shh, I received this error message:

./services
Anope 2.0.20, build #1, compiled 10:44:08 May 29 2026
Using configuration file conf/services.conf
Attempting to connect to uplink #1 services.centauria.fr (51.178.82.110/7000) with protocol UnrealIRCd 4+
Successfully connected to uplink #1 services.centauria.fr:7000
Lost connection from uplink #1 (services.centauria.fr:7000)
Check that you are not connecting Anope to an SSL enabled port without configuring SSL in Anope (or vice versa)

I want to clarify that I haven't changed any of the configuration settings, and that version 2.0.19 was working perfectly.

I suspect I have an SSL-related error; here is my services.conf configuration :

uplink
{
	/*
	 * The IP or hostname of the IRC server you wish to connect Services to.
	 * Usually, you will want to connect Services over 127.0.0.1 (aka localhost).
	 *
	 * NOTE: On some shell providers, this will not be an option.
	 */
	host = "services.centauria.fr"

	/*
	 * Enable if Services should connect using IPv6.
	 */
	ipv6 = no

	/*
	 * Enable if Services should connect using SSL.
	 * You must have an SSL module loaded for this to work.
	 */
	ssl = yes

	/*
	 * The port to connect to.
	 * The IRCd *MUST* be configured to listen on this port, and to accept
	 * server connections.
	 *
	 * Refer to your IRCd documentation for how this is to be done.
	 */
	port = 7000

	/*
	 * The password to send to the IRC server for authentication.
	 * This must match the link block on your IRCd.
	 *
	 * Refer to your IRCd documentation for more information on link blocks.
	 */
	password = "pass"
	
}

and the unrealircd.conf (6.2.5) :

link services.centauria.fr
{
	incoming {
		mask *@51.178.82.110;
	}

	outgoing {
		bind-ip *; /* ou une IP précise */
		hostname services.centauria.fr;
		port 7000;
		options { ssl; }
	}

	password "pass" { spkifp; }; 

	class servers;
}

Thank you in advance for your support.

[sadiepowell]

As you're using SSL did you remember to enable the SSL module in ./extras?

[Laurent6540]

it's ok, module ssl It was no longer charged... . Thank you!