I can't reconnect my LYWSD03MMC to the zigbee hub

[MSergey-Iz-NURa]

Hello! I previously flashed my LYWSD03MMC with v1.2.4 and immediately connected it to the zigbee hub. Everything worked fine. After that, I disconnected LYWSD03MMC from the zigbee hub. Now I can't reconnect LYWSD03MMC to this zigbee hub, or to another zigbee hub. The bluetooth icon is lit on LYWSD03MMC. I tried to reset it by holding it for 8 seconds (you can see "- - -"). What can I do to reconnect it?

[pvvx]

After removal from the Zigbee network, the device is given a shutdown command. On this command, the entire thermometer is completely turned off - it goes into minimal consumption mode.
The output from the disconnected state is made by turning off and turned on the battery.

[MSergey-Iz-NURa]

I turned the battery off and on. Even now it will turn off the battery for half an hour. But it didn't work. What else can I try?

[pvvx]

https://github.com/pvvx/ZigbeeTLc?tab=readme-ov-file#action-of-the-button