Firmware support for TS0201 (_TZ3000_yujem9ee)?

[kuncy7]

Device

• Model: TS0201
• Manufacturer: _TZ3000_yujem9ee
• Z2M device page: https://www.zigbee2mqtt.io/devices/TS0201.html
• Physical device: No display (but Z2M incorrectly identifies it as "with display")

Question

Is there firmware support for this device? I checked the supported devices table and _TZ3000_yujem9ee is not listed — only _TZ3000_xr3htd96 and _TZ3000_qsefbina are documented for TS0201_TZ3000.

If the chip is TLSR8258, would 1141-0211-01363001-ZTS0201Z3000.zigbee work?
And if yes — is the I2C sensor on this variant CHT8305 or something else?

Z2M database entry

{"id":6,"type":"EndDevice","ieeeAddr":"0xa4c138ea66d8a6a0","nwkAddr":22188,"manufId":4417,"manufName":"_TZ3000_yujem9ee","powerSource":"Battery","modelId":"TS0201","epList":[1],"endpoints":{"1":{"profId":260,"epId":1,"devId":770,"inClusterList":[1,3,1026,1029,0],"outClusterList":[3,25,10],"clusters":{"genBasic":{"attributes":{"65506":51,"65508":1,"65534":0,"modelId":"TS0201","manufacturerName":"_TZ3000_yujem9ee","powerSource":3,"zclVersion":3,"appVersion":70,"stackVersion":0,"hwVersion":1,"dateCode":""}},"msTemperatureMeasurement":{"attributes":{"measuredValue":2259}},"msRelativeHumidity":{"attributes":{"measuredValue":3230}},"genPowerCfg":{"attributes":{"batteryPercentageRemaining":176,"batteryVoltage":29}}},"binds":[],"configuredReportings":[],"meta":{}}},"appVersion":70,"stackVersion":0,"hwVersion":1,"dateCode":"","zclVersion":3,"interviewCompleted":true,"interviewState":"SUCCESSFUL","meta":{"configured":1946894323},"lastSeen":1777806809869}

Z2M version

2.10.0, coordinator EmberZNet 9.0.1 [GA]

[pvvx]

The actual circuit diagram of the device cannot be determined from the Tuya names. It is necessary to clarify which pins of the chip the sensor, button, LED, etc. are connected to.

If the chip is TLSR8258, would 1141-0211-01363001-ZTS0201Z3000.zigbee work?

All alternative firmware versions are suitable for chips marked TLSR8250, TLSR8251, TLSR8253, TLSR8258, TLSR8656, and Z2.