Slow and locking up

[Cncninja]

Hello Shaise,

This sender is what I've been looking for especially with A-axis support, I downloaded and it launches fine but if I try and click or move through the UI it just freezes or is 5 sec delayed. My PC is a win 10 i7-7700K with 1070 video card, 16gb ram. any help would be great to get this to run

[shaise]

hi @Cncninja
I have tested it on very slow laptop with intel graphics card without any issues.
Is it slowing down before or after connecting to grbl?
Also, did you run the executable or compiled it yourself?
shai

[Cncninja]

Hello Shai, I downloaded the zip and ran the exe. it was slow from the start I can't even click to connect. Ill make a video to show, Specs: windows 10, i7,16GB ram,SSD,1070gtx video.

…

On Thu, Dec 3, 2020 at 12:28 PM Shai Seger ***@***.***> wrote: hi @Cncninja <https://github.com/Cncninja> I have tested it on very slow laptop with intel graphics card without any issues. Is it slowing down before or after connecting to grbl? Also, did you run the executable or compiled it yourself? shai — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#5 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AR7T535YKDHNJCSH7LKFOHDSS7RHDANCNFSM4UMNOD2A> .

[Cncninja]

grblcnc.webm <https://drive.google.com/file/d/1bXw7dH9-wjHA8ct3h-4Wt3Rq-aXLGBsQ/view?usp=drive_web> here is a video if it helps On Thu, Dec 3, 2020 at 3:51 PM Chris wilson <wilson152chris@gmail.com> wrote:

…

Hello Shai, I downloaded the zip and ran the exe. it was slow from the start I can't even click to connect. Ill make a video to show, Specs: windows 10, i7,16GB ram,SSD,1070gtx video. On Thu, Dec 3, 2020 at 12:28 PM Shai Seger ***@***.***> wrote: > hi @Cncninja <https://github.com/Cncninja> > I have tested it on very slow laptop with intel graphics card without any > issues. > Is it slowing down before or after connecting to grbl? > Also, did you run the executable or compiled it yourself? > shai > > — > You are receiving this because you were mentioned. > Reply to this email directly, view it on GitHub > <#5 (comment)>, or > unsubscribe > <https://github.com/notifications/unsubscribe-auth/AR7T535YKDHNJCSH7LKFOHDSS7RHDANCNFSM4UMNOD2A> > . >

[Cncninja]

Thanks so much by the way On Thu, Dec 3, 2020 at 3:59 PM Chris wilson <wilson152chris@gmail.com> wrote:

…

grblcnc.webm <https://drive.google.com/file/d/1bXw7dH9-wjHA8ct3h-4Wt3Rq-aXLGBsQ/view?usp=drive_web> here is a video if it helps On Thu, Dec 3, 2020 at 3:51 PM Chris wilson ***@***.***> wrote: > Hello Shai, > > I downloaded the zip and ran the exe. it was slow from the start I > can't even click to connect. Ill make a video to show, Specs: windows 10, > i7,16GB ram,SSD,1070gtx video. > > On Thu, Dec 3, 2020 at 12:28 PM Shai Seger ***@***.***> > wrote: > >> hi @Cncninja <https://github.com/Cncninja> >> I have tested it on very slow laptop with intel graphics card without >> any issues. >> Is it slowing down before or after connecting to grbl? >> Also, did you run the executable or compiled it yourself? >> shai >> >> — >> You are receiving this because you were mentioned. >> Reply to this email directly, view it on GitHub >> <#5 (comment)>, or >> unsubscribe >> <https://github.com/notifications/unsubscribe-auth/AR7T535YKDHNJCSH7LKFOHDSS7RHDANCNFSM4UMNOD2A> >> . >> >