myhisense-tv

Python library and Home Assistant integration for Hisense/Vidaa Smart TV control. Two integration options available:

1. Custom Component (Recommended) - Native Home Assistant integration with SSDP auto-discovery
2. MQTT Bridge - Docker-based bridge for MQTT-based home automation setups

Features

• Home Assistant Custom Component with config flow UI
• SSDP Auto-Discovery - TVs automatically detected on network
• PIN Pairing - Secure authentication via TV screen
• Control Hisense/Vidaa TVs via MQTT (optional bridge mode)
• Power on/off (with Wake-on-LAN support)
• Volume control and mute
• Input source switching
• App launching (Netflix, YouTube, etc.)
• Navigation keys (up, down, left, right, ok, back, home, menu)
• Multi-TV support
• Docker deployment ready (MQTT bridge)

Quick Start

1. Prerequisites

• Paired UUID: You must first pair a device with your TV using the official Vidaa app
• TV IP Address: Your TV's IP address (static IP recommended)
• MQTT Broker: Mosquitto or Home Assistant's built-in broker
• Docker (recommended) or Python 3.8+

2. Configure

Copy the example config and edit:

cp config.example.yaml config.yaml
nano config.yaml

Minimum required settings:

mqtt:
  host: "192.168.1.100"    # Your MQTT broker IP

tv:
  host: "YOUR_TV_IP"       # Your TV's IP address
  uuid: "xx:xx:xx:xx:xx:xx" # UUID from Vidaa app pairing
  mac: "XX:XX:XX:XX:XX:XX"  # TV MAC for Wake-on-LAN
  name: "Living Room TV"

3. Run with Docker

docker compose up -d

View logs:

docker compose logs -f

4. Home Assistant

The TV will automatically appear in Home Assistant via MQTT discovery. You'll get:

• Media Player entity with power, volume, source controls
• Navigation Buttons for remote control
• App Launcher select for streaming apps

Manual Installation

If not using Docker:

# Install dependencies
pip install -r requirements.txt

# Run
python -m hisense2mqtt --config config.yaml

Configuration

See docs/CONFIGURATION.md for full configuration reference.

Environment Variables

Override config via environment:

Variable	Description
MQTT_HOST	MQTT broker hostname
MQTT_PORT	MQTT broker port
MQTT_USERNAME	MQTT username
MQTT_PASSWORD	MQTT password
TV_HOST	TV IP address
TV_UUID	Paired UUID
TV_MAC	TV MAC address
LOG_LEVEL	Logging level

MQTT Topics

Commands (publish to these)

Topic	Payload	Description
hisense2mqtt/{id}/set/power	ON / OFF	Power control
hisense2mqtt/{id}/set/volume	0-100	Set volume
hisense2mqtt/{id}/set/mute	ON / OFF	Toggle mute
hisense2mqtt/{id}/set/source	hdmi1, hdmi2, etc.	Change input
hisense2mqtt/{id}/set/key	up, down, ok, etc.	Send remote key
hisense2mqtt/{id}/set/app	netflix, youtube, etc.	Launch app

State (subscribe to these)

Topic	Payload	Description
hisense2mqtt/{id}/state/power	ON / OFF	Power state
hisense2mqtt/{id}/state/volume	0-100	Current volume
hisense2mqtt/{id}/state/mute	ON / OFF	Mute state
hisense2mqtt/{id}/state/source	Source name	Current input
hisense2mqtt/{id}/state/available	online / offline	Availability

Getting the UUID

The UUID is required for authentication. To get it:

1. Install the official Vidaa app on your phone
2. Pair the app with your TV (enter the PIN shown on TV)
3. The UUID is your phone's Bluetooth/WiFi MAC address
4. Check your phone's settings or use adb logcat to find it

Alternatively, if you have a working UUID from previous pairing, use that.

Wake-on-LAN

To turn on the TV when it's off:

1. Enable "Wake on LAN" or "Network Standby" in TV settings
2. Set tv.mac in config to your TV's MAC address
3. Connect TV via Ethernet (WiFi WoL is unreliable)
4. Set options.wake_on_lan: true

Troubleshooting

See docs/TROUBLESHOOTING.md for common issues.

Quick Fixes

TV not responding:

• Ensure TV is on the same network
• Check TV IP address is correct
• Verify UUID is from a paired device

Discovery not appearing in HA:

• Check MQTT broker connection in HA
• Verify discovery_prefix matches HA config
• Check logs: docker compose logs hisense2mqtt

Wake-on-LAN not working:

• TV must be connected via Ethernet
• Enable WoL in TV settings
• Verify MAC address is correct

Library Usage

Install the library:

pip install myhisense-tv

Basic usage:

from hisense_tv import HisenseTV, discover_all

# Discover TVs on network
devices = discover_all(timeout=5.0)
for ip, device in devices.items():
    print(f"Found: {ip} - {device.name}")

# Connect to TV
tv = HisenseTV(
    host="YOUR_TV_IP",
    mac_address="XX:XX:XX:XX:XX:XX",
    use_dynamic_auth=True,
)

if tv.connect():
    # Control TV
    tv.power_on()
    tv.volume_up()
    tv.launch_app("netflix")

    tv.disconnect()

See docs/API.md for full API reference.

Documentation

• API Reference
• Configuration Reference
• Home Assistant Integration
• MQTT Topics
• Troubleshooting
• Protocol Analysis

Contributing

Contributions are welcome! See CONTRIBUTING.md for guidelines.

License

This project is licensed under the MIT License - see the LICENSE file for details.

Credits

Protocol reverse-engineered from the Vidaa Android app.