Cannot ARM/Disarm

[reylas]

Whenever I try to arm or disarm the system with the concord232-client a strange thing keeps happening. I can run the server in debug mode, and I can see it try to arm, but then a message returns that implies it is waiting for the code. the code was sent using the --master XXXX command line option. On the display of the keypad, it is asking for the arm code.

Is there something I am missing? It is like it is not sending the arm code.

[quantumslurm]

I'm having the same issue.
When sending the arm command the debug shows the panel is displaying "Enter Code" and then the panel times out. Sending the arm command with --master XXXX doesn't seem to make a difference.

[tlyoung99]

I'm having this same issue. I can arm at the keypad and then disarm via concord232-client. I cannot arm via concord232-client. That includes arm-stay, arm-away and all of the various options (silent, instant, etc.) Each time I issue one of these commands, my control panel says "Enter Code". I've tried installer code, master code, and user code in the command. All follow the same path. Any ideas? I see that this has been an issue for over a year. Just trying to see if anyone has found a workaround.

[silfa718]

I am having the same issue as well and haven't found a solution.

[brianewman]

I resolved this by enabling Quick Arm (on partition1) using the System Programming menu from my touchpad.

[silfa718]

Can you share how to do this

[tlyoung99]

This solved my problem as well. To enable Quick Arm:
-8 + [Installer Code]
-00 for system programming
-0011 is the shortcut to get to quick arm
-# to enter edit mode
-1 to switch value from off to on
-* until you see "System Programming"
-Up once to get to Exit
-#

[silfa718]

How do I find my installer code

[JasonCarter80]

I used this method: https://packetu.com/2017/12/30/reading-eeprom-obtaining-the-ge-concord-express-installer-code/

[tlyoung99]

I used the same method, but only after trying every default and potential installer code I found online.

[AZDane]

silfa718, Try 6321. Seen that number several places.

[silfa718]

Thanks, but that and every code I can think of doesn't work.

[AZDane]

Did you search the web. Who installed your system? What company?

[silfa718]

Guessed it, got quick arm enabled, and now I can arm and disarm from HA UI. Thanks for the help.