ATAG ONE Custom Component for Home Assistant

Instalation

1. Add files to custom_components directory or use HACS

   • .homeassistant/custom_components/atag/*.py

2. Add the new platform in the configuration.yaml to enable climate, water_heater and default sensors to HA. Uses Auto-discovery if no host data is provided:

   atag:

3. Add optional configuration parameters if necessary:

   atag:
     host: # in case autodiscovery fails
     email:
     port: 10000 # in case connecting through port redirect
     scan_interval:
     sensors:
       - device_id
       - device_status
       - connection_status
       - date_time
       - current_temperature
       - outside_temp
       - outside_temp_avg
       - weather_status
       - pcb_temp
       - temperature
       - operation_mode
       - ch_water_pressure
       - ch_water_temp
       - ch_return_temp
       - dhw_water_temp
       - dhw_water_pres
       - dhw_flow_rate
       - boiler_status
       - boiler_config
       - burning_hours
       - voltage
       - current
       - flame_level
       - report_time
       - ch_status
       - ch_control_mode
       - ch_mode_duration
       - extend_duration
       - fireplace_duration
       - vacation_duration
       - dhw_temp_setp
       - dhw_status
       - dhw_mode
       - dhw_mode_temp
       - weather_current_temperature

4. Additional sensors can be added (but will show a warning), anything in the retrieve reply should be possible:

   "device_id", "device_status", "connection_status", "date_time",
   "report_time", "burning_hours", "device_errors", "boiler_errors", "room_temp",
   "outside_temp", "dbg_outside_temp", "pcb_temp", "ch_setpoint", "dhw_water_temp",
   "ch_water_temp", "dhw_water_pres", "ch_water_pres", "ch_return_temp",
   "boiler_status", "boiler_config", "ch_time_to_temp", "shown_set_temp",
   "power_cons", "tout_avg", "rssi", "current", "voltage", "charge_status",
   "lmuc_burner_starts", "dhw_flow_rate", "resets", "memory_allocation",
   "boiler_temp", "boiler_return_temp", "min_mod_level", "rel_mod_level",
   "boiler_capacity", "target_temp", "overshoot", "max_boiler_temp", "alpha_used",
   "regulation_state", "ch_m_dot_c", "c_house", "r_rad", "r_env", "alpha", "alpha_max",
   "delay", "mu", "threshold_offs", "wd_k_factor ", "wd_exponent",
   "lmuc_burner_hours", "lmuc_dhw_hours", "KP", "KI",
   "ch_status", "ch_control_mode", "ch_mode", "ch_mode_duration", "ch_mode_temp",
   "dhw_temp_setp", "dhw_status", "dhw_mode", "dhw_mode_temp", "weather_temp",
   "weather_status", "vacation_duration", "extend_duration", "fireplace_duration"