Collection of scripts to run and setup the HV crate
I believe the PMT target voltage is 1750v
crate_voltage.txt is where you write in the voltage/gain specifics for each pmt
set_crate_voltages.sh sets voltages based on values in crate_voltage.txt
turn_off_PMT_voltages.sh sets all PMT voltages to 0
Page 21 is where all of the net-snmp commands start being explained. http://file.wiener-d.com/documentation/MPOD/WIENER_MPOD_Manual_2.7.1.pdf
########################################################################################## brief notes on commands, options and arguements to follow... ##########################################################################################
this prints out the channel, voltages, currents, and wether its on or off. same as when you type http://198.125.161.201 into a webrowser url. it has 7 columns of data --------V snmpwalk -Cp -Oqv -v 2c -m +WIENER-CRATE-MIB -c public 198.125.161.201 crate
this command tells you how many channels you have avaialable----V snmpget -Oqv -v 2c -m +WIENER-CRATE-MIB -c guru 198.125.161.201 outputNumber.0
the borrowed module has 16 channels each of the other modules (4) has 48 each