Implement Mirage Extension

mirage/libs/ble_utils/constants.py

@@ -98,3 +98,103 @@ class BLESniffingMode:
 	ADVERTISEMENT		= 0x0
 	NEW_CONNECTION 		= 0x1
 	EXISTING_CONNECTION	= 0x2
+
+
+# Control PDU opcodes supported by Zephyr RTOS
+LLCTRL_TYPE_CONN_UPDATE_IND = 0x00
+LLCTRL_TYPE_CHAN_MAP_IND = 0x01
+LLCTRL_TYPE_TERMINATE_IND = 0x02
+LLCTRL_TYPE_ENC_REQ = 0x03
+LLCTRL_TYPE_ENC_RSP = 0x04
+LLCTRL_TYPE_START_ENC_REQ = 0x05
+LLCTRL_TYPE_START_ENC_RSP = 0x06
+LLCTRL_TYPE_UNKNOWN_RSP = 0x07
+LLCTRL_TYPE_FEATURE_REQ = 0x08
+LLCTRL_TYPE_FEATURE_RSP = 0x09
+LLCTRL_TYPE_PAUSE_ENC_REQ = 0x0A
+LLCTRL_TYPE_PAUSE_ENC_RSP = 0x0B
+LLCTRL_TYPE_VERSION_IND = 0x0C
+LLCTRL_TYPE_REJECT_IND = 0x0D
+LLCTRL_TYPE_SLAVE_FEATURE_REQ = 0x0E
+LLCTRL_TYPE_CONN_PARAM_REQ = 0x0F
+LLCTRL_TYPE_CONN_PARAM_RSP = 0x10
+LLCTRL_TYPE_REJECT_EXT_IND = 0x11
+LLCTRL_TYPE_PING_REQ = 0x12
+LLCTRL_TYPE_PING_RSP = 0x13
+LLCTRL_TYPE_LENGTH_REQ = 0x14
+LLCTRL_TYPE_LENGTH_RSP = 0x15
+LLCTRL_TYPE_PHY_REQ = 0x16
+LLCTRL_TYPE_PHY_RSP = 0x17
+LLCTRL_TYPE_PHY_UPD_IND = 0x18
+LLCTRL_TYPE_MIN_USED_CHAN_IND = 0x19
+
+
+# LL Controller Error Codes
+LL_ERROR_CODES = {
+    0x01: "UNKNOWN HCI COMMAND",
+    0x02: "UNKNOWN CONNECTION IDENTIFIER",
+    0x03: "HARDWARE FAILURE",
+    0x04: "PAGE TIMEOUT",
+    0x05: "AUTHENTICATION FAILURE",
+    0x06: "PIN OR KEY MISSING",
+    0x07: "MEMORY CAPACITY EXCEEDED",
+    0x08: "CONNECTION TIMEOUT",
+    0x09: "CONNECTION LIMIT EXCEEDED",
+    0x0A: "SYNCHRONOUS CONNECTION LIMIT TO A DEVICE EXCEEDED",
+    0x0B: "CONNECTION ALREADY EXISTS",
+    0x0C: "COMMAND DISALLOWED",
+    0x0D: "CONNECTION REJECTED DUE TO LIMITED RESOURCES",
+    0x0E: "CONNECTION REJECTED DUE TO SECURITY REASONS",
+    0x0F: "CONNECTION REJECTED DUE TO UNACCEPTABLE BD_ADDR",
+    0x10: "CONNECTION ACCEPT TIMEOUT EXCEEDED",
+    0x11: "UNSUPPORTED FEATURE OR PARAMETER VALUE",
+    0x12: "INVALID HCI COMMAND PARAMETERS",
+    0x13: "REMOTE USER TERMINATED CONNECTION",
+    0x14: "REMOTE DEVICE TERMINATED CONNECTION DUE TO LOW RESOURCES",
+    0x15: "REMOTE DEVICE TERMINATED CONNECTION DUE TO POWER OFF",
+    0x16: "CONNECTION TERMINATED BY LOCAL HOST",
+    0x17: "REPEATED ATTEMPTS",
+    0x18: "PAIRING NOT ALLOWED",
+    0x19: "UNKNOWN LMP PDU",
+    0x1A: "UNSUPPORTED REMOTE FEATURE / UNSUPPORTED LMP FEATURE",
+    0x1B: "SCO OFFSET REJECTED",
+    0x1C: "SCO INTERVAL REJECTED",
+    0x1D: "SCO AIR MODE REJECTED",
+    0x1E: "INVALID LMP PARAMETERS / INVALID LL PARAMETERS",
+    0x1F: "UNSPECIFIED ERROR",
+    0x20: "UNSUPPORTED LMP PARAMETER VALUE / UNSUPPORTED LL PARAMETER VALUE",
+    0x21: "ROLE CHANGE NOT ALLOWED",
+    0x22: "LMP RESPONSE TIMEOUT / LL RESPONSE TIMEOUT",
+    0x23: "LMP ERROR TRANSACTION COLLISION / LL PROCEDURE COLLISION",
+    0x24: "LMP PDU NOT ALLOWED",
+    0x25: "ENCRYPTION MODE NOT ACCEPTABLE",
+    0x26: "LINK KEY CANNOT BE CHANGED",
+    0x27: "REQUESTED QoS NOT SUPPORTED",
+    0x28: "INSTANT PASSED",
+    0x29: "PAIRING WITH UNIT KEY NOT SUPPORTED",
+    0x2A: "DIFFERENT TRANSACTION COLLISION",
+    0x2C: "QoS UNACCEPTABLE PARAMETER",
+    0x2D: "QoS REJECTED",
+    0x2E: "CHANNEL ASSESSMENT NOT SUPPORTED",
+    0x2F: "INSUFFICIENT SECURITY",
+    0x30: "PARAMETER OUT OF MANDATORY RANGE",
+    0x32: "ROLE SWITCH PENDING",
+    0x34: "RESERVED SLOT VIOLATION",
+    0x35: "ROLE SWITCH FAILED",
+    0x36: "EXTENDED INQUIRY RESPONSE TOO LARGE",
+    0x37: "SIMPLE PAIRING NOT SUPPORTED BY HOST",
+    0x38: "HOST BUSY–PAIRING",
+    0x39: "CONNECTION REJECTED DUE TO NO SUITABLE CHANNEL FOUND",
+    0x3A: "CONTROLLER BUSY",
+    0x3B: "UNACCEPTABLE CONNECTION PARAMETERS",
+    0x3C: "ADVERTISING TIMEOUT",
+    0x3D: "CONNECTION TERMINATED DUE TO MIC FAILURE",
+    0x3E: "CONNECTION FAILED TO BE ESTABLISHED / SYNCHRONIZATION TIMEOUT",
+    0x3F: "MAC CONNECTION FAILED",
+    0x40: "COARSE CLOCK ADJUSTMENT REJECTED BUT WILL TRY TO ADJUST USING CLOCK DRAGGING",
+    0x41: "TYPE0 SUBMAP NOT DEFINED",
+    0x42: "UNKNOWN ADVERTISING IDENTIFIER",
+    0x43: "LIMIT REACHED",
+    0x44: "OPERATION CANCELLED BY HOST",
+    0x45: "PACKET TOO LONG",
+}

mirage/libs/ble_utils/dissectors.py

@@ -448,7 +448,7 @@ def build(self):
 		gui = self.content["gui"]
 		shift = self.content["shift"]
 		(hidCode,modifiers) = HIDMapping(locale).getHIDCodeFromKey(key=key,alt=alt,ctrl=ctrl,shift=shift,gui=gui)
-		self.data = bytes([0,modifiers,hidCode,0,0,0,0,0])
+		self.data = bytes([modifiers,hidCode,0,0,0,0,0,0,0,0,0])
 
 	def __str__(self):
 		sortie = "key="+str(self.content["key"])+",ctrl="+("yes" if self.content["ctrl"] else "no")+",alt="+("yes" if self.content["alt"] else "no")+",shift="+("yes" if self.content["shift"] else "no")+",gui="+("yes" if self.content["gui"] else "no")