WARNING

THIS PROJECT I CREATED FOR MYSELF ONLY, THIS SOFTWARE IS PROVIDED "AS IS".
You can create an issue or a pull request, but I can't guarantee that I can handle it.
P.S. The project planned to listen for packets to find the "magic packet" (true WoL), but given that esp is a low-power controller, I decided to refuse this, maybe in the future I will return to this issue. If you need to "click on a button" see the documentation below.

ESPwol remote control pc

• show power led
• show hdd activity
• "press/hold" power button
• "press/hold" reset button

using modulses

• file gpio gpio_pulse net node tmr uart wifi
• try to build youself firmware with this modules if default firmware craches.

install

• turn your nodeMCU device into lua mode
• download and open this repo in ESPlorer
• edit your wifi credentials in config.lua
• use ESPlorer connect to your ESP
• load index.html, init.lua, config.lua and srv.lua into esp using the "Upload..." button located under the built-in code editor
• reset your esp and find her ip address in the console
• go to http://<ESP-ADDR> and enjoy!

How to use

• go to http://<ESP-ADDR> and enjoy!
• you will see 2 "LEDs" that show the power and activity of the hard drive on the real computer, they are updated in real time
• also you will see 2 "power" and "reset" buttons WHILE YOU PRESS 1 OF THESE BUTTONS REAL ESP WILL KEEP THIS "button" ON, this gives you the ability to make both "short" and long presses that you may need on different occasions

Mini documentation

files for ESP

• config.lua - CONFIG FILE, wifi credentials
• index.html - main web file with some css, js and...html, esp send him on / request
• init.lua - main load module, initialize wifi, dhcp client, load srv.lua
• srv.lua - web server module

API

• GET /status - return json {"power":true|false, "hdd":true|false} where
  • power - state of D5 pin
  • hdd - state of D6 pin
• GET /set/[power|reset|all]/[on|off] where
  • button
    • power - work with D1 pin
    • reset - work with D2 pin
  • action
    • on - set HIGH to button pin
    • off - set LOW to button pin

API Linux examples

• wget -qO - http://<IP-YOUR-ESP>/status - get to output input status
• wget -qO - http://<IP-YOUR-ESP>/set/power/on - turn on power button and hold infinity
• wget -qO- http://<IP-YOUR-ESP>/set/power/on ; sleep 0.5 ; wget -qO- http://<IP-YOUR-ESP>/set/power/off - short press power button
• wget -qO- http://<IP-YOUR-ESP>/set/reset/on ; sleep 0.5 ; wget -qO- http://<IP-YOUR-ESP>/set/reset/off - short press reset button
• wget -qO- http://<IP-YOUR-ESP>/set/all/on ; sleep 0.5 ; wget -qO- http://<IP-YOUR-ESP>/set/all/off - short press power and reset button
• wget -qO- http://<IP-YOUR-ESP>/set/power/on ; sleep 8 ; wget -qO- http://<IP-YOUR-ESP>/set/power/off - long press power button(in many cases force shutdown pc)