v2.5.0

Important

On Linux, usbmuxd must be installed on your system. Don't worry though, it comes with most popular distributions by default already! However, due to some distributions udev rules usbmuxd may stop running after no devices are connected causing Impactor to not detect the device after plugging it in. You can mitigate this by plugging your phone first then restarting the app.

Auto-refresh will not work the same on Linux as it would on other platforms like macOS/Windows, due to usbmuxd lacking WiFi connectivity so it will attempt to do it automatically only when a device is plugged in, we are looking for a proper solution though.

On Windows, iTunes must be downloaded so Impactor is able to use the drivers for interacting with Apple devices.

Note

Pairing file installation is only available for devices plugged in via USB.

Tip

chmod +x /path/to/AppImage after downloading may be required for Linux.

This project is still very new! Expect bugs to occur :)

What's Changed

• Added language picker to settings by @F2had in #195
• Added Ksign support for pairing.
• Added Arabic translation by @F2had in #194
• Added Traditional Chinese (Taiwan) translation by @Perry11-20 in #198
• Fixed issue where device wouldn't properly commit to a newly created remote-pairing file.
• Fixed issue where 2fa code was being logged.

New Contributors

• @osageling made their first contribution in #192
• @F2had made their first contribution in #194
• @Perry11-20 made their first contribution in #198

Full Changelog: v2.4.0...v2.5.0

Files

• Impactor-macos-universal.dmg: Impactor GUI for macOS.
• Impactor-windows-${arch}-${type}.exe: Impactor GUI for Windows on CPU architecture ${arch}.
• Impactor-linux-${arch}.AppImage: Impactor GUI for Linux on CPU architecture ${arch}
• plumesign-macos-universal: Impactor CLI for macOS.
• plumesign-windows-${arch}.exe: Impactor CLI for Windows on CPU architecture ${arch}.
• plumesign-linux-${arch}: Impactor CLI for Linux on CPU architecture ${arch}

v2.4.0

Important

On Linux, usbmuxd must be installed on your system. Don't worry though, it comes with most popular distributions by default already! However, due to some distributions udev rules usbmuxd may stop running after no devices are connected causing Impactor to not detect the device after plugging it in. You can mitigate this by plugging your phone first then restarting the app.

Auto-refresh will not work the same on Linux as it would on other platforms like macOS/Windows, due to usbmuxd lacking WiFi connectivity so it will attempt to do it automatically only when a device is plugged in, we are looking for a proper solution though.

On Windows, iTunes must be downloaded so Impactor is able to use the drivers for interacting with Apple devices.

Note

Pairing file installation is only available for devices plugged in via USB.

Tip

chmod +x /path/to/AppImage after downloading may be required for Linux.

This project is still very new! Expect bugs to occur :)

What's Changed

• Added Spanish translation by @Deci8BelioS in #181
• Added Ukraine and Russia localization by @W1xced-io in #182
• Added Vietnamese translation by @Astear17 in #187
• Fixed Simplified Chinese by @xiangfeidexiaohuo in #183
• Updated dependencies.

New Contributors

• @Deci8BelioS made their first contribution in #181
• @W1xced-io made their first contribution in #182
• @Astear17 made their first contribution in #187

Full Changelog: v2.3.0...v2.4.0

Files

• Impactor-macos-universal.dmg: Impactor GUI for macOS.
• Impactor-windows-${arch}-${type}.exe: Impactor GUI for Windows on CPU architecture ${arch}.
• Impactor-linux-${arch}.AppImage: Impactor GUI for Linux on CPU architecture ${arch}
• plumesign-macos-universal: Impactor CLI for macOS.
• plumesign-windows-${arch}.exe: Impactor CLI for Windows on CPU architecture ${arch}.
• plumesign-linux-${arch}: Impactor CLI for Linux on CPU architecture ${arch}

v2.3.0

Important

On Linux, usbmuxd must be installed on your system. Don't worry though, it comes with most popular distributions by default already! However, due to some distributions udev rules usbmuxd may stop running after no devices are connected causing Impactor to not detect the device after plugging it in. You can mitigate this by plugging your phone first then restarting the app.

Auto-refresh will not work the same on Linux as it would on other platforms like macOS/Windows, due to usbmuxd lacking WiFi connectivity so it will attempt to do it automatically only when a device is plugged in, we are looking for a proper solution though.

On Windows, iTunes must be downloaded so Impactor is able to use the drivers for interacting with Apple devices.

Note

Pairing file installation is only available for devices plugged in via USB.

Tip

chmod +x /path/to/AppImage after downloading may be required for Linux.

This project is still very new! Expect bugs to occur :)

What's Changed

• Added French translation by @nin0-dev in #172
• Added German translation by @cr4zyengineer in #175
• Added Italian translation by @Checkm8ra1n in #176
• Added Polish translation by @marcinmajsc in #177
• Added Simplified Chinese translation by @xiangfeidexiaohuo in #178
• Fixed issue where fonts may display incorrectly by bundling our own font by @se2crid in #169

New Contributors

• @nin0-dev made their first contribution in #172
• @Checkm8ra1n made their first contribution in #176
• @marcinmajsc made their first contribution in #177
• @xiangfeidexiaohuo made their first contribution in #178

Full Changelog: v2.2.3...v2.3.0

Files

• Impactor-macos-universal.dmg: Impactor GUI for macOS.
• Impactor-windows-${arch}-${type}.exe: Impactor GUI for Windows on CPU architecture ${arch}.
• Impactor-linux-${arch}.AppImage: Impactor GUI for Linux on CPU architecture ${arch}
• plumesign-macos-universal: Impactor CLI for macOS.
• plumesign-windows-${arch}.exe: Impactor CLI for Windows on CPU architecture ${arch}.
• plumesign-linux-${arch}: Impactor CLI for Linux on CPU architecture ${arch}

v2.2.3

Important

On Linux, usbmuxd must be installed on your system. Don't worry though, it comes with most popular distributions by default already! However, due to some distributions udev rules usbmuxd may stop running after no devices are connected causing Impactor to not detect the device after plugging it in. You can mitigate this by plugging your phone first then restarting the app.

Auto-refresh will not work the same on Linux as it would on other platforms like macOS/Windows, due to usbmuxd lacking WiFi connectivity so it will attempt to do it automatically only when a device is plugged in, we are looking for a proper solution though.

On Windows, iTunes must be downloaded so Impactor is able to use the drivers for interacting with Apple devices.

Note

Pairing file installation is only available for devices plugged in via USB.

Tip

chmod +x /path/to/AppImage after downloading may be required for Linux.

This project is still very new! Expect bugs to occur :)

What's Changed

• Fixed (hopefully) an issue when trying to log in with built-in Apple root certificate on Windows.

Full Changelog: v2.2.2...v2.2.3

Files

• Impactor-macos-universal.dmg: Impactor GUI for macOS.
• Impactor-windows-${arch}-${type}.exe: Impactor GUI for Windows on CPU architecture ${arch}.
• Impactor-linux-${arch}.AppImage: Impactor GUI for Linux on CPU architecture ${arch}
• plumesign-macos-universal: Impactor CLI for macOS.
• plumesign-windows-${arch}.exe: Impactor CLI for Windows on CPU architecture ${arch}.
• plumesign-linux-${arch}: Impactor CLI for Linux on CPU architecture ${arch}

v2.2.2

Important

On Linux, usbmuxd must be installed on your system. Don't worry though, it comes with most popular distributions by default already! However, due to some distributions udev rules usbmuxd may stop running after no devices are connected causing Impactor to not detect the device after plugging it in. You can mitigate this by plugging your phone first then restarting the app.

Auto-refresh will not work the same on Linux as it would on other platforms like macOS/Windows, due to usbmuxd lacking WiFi connectivity so it will attempt to do it automatically only when a device is plugged in, we are looking for a proper solution though.

On Windows, iTunes must be downloaded so Impactor is able to use the drivers for interacting with Apple devices.

Note

Pairing file installation is only available for devices plugged in via USB.

Tip

chmod +x /path/to/AppImage after downloading may be required for Linux.

This project is still very new! Expect bugs to occur :)

What's Changed

• Fixed issue where bundle folders were named idevice.ipa.app when uploading with AFC.
  • Most notably, fixes Dopamine from detecting if you're in the jailbroken state.

Full Changelog: v2.2.1...v2.2.2

Files

• Impactor-macos-universal.dmg: Impactor GUI for macOS.
• Impactor-windows-${arch}-${type}.exe: Impactor GUI for Windows on CPU architecture ${arch}.
• Impactor-linux-${arch}.AppImage: Impactor GUI for Linux on CPU architecture ${arch}
• plumesign-macos-universal: Impactor CLI for macOS.
• plumesign-windows-${arch}.exe: Impactor CLI for Windows on CPU architecture ${arch}.
• plumesign-linux-${arch}: Impactor CLI for Linux on CPU architecture ${arch}

v2.2.1

Important

On Linux, usbmuxd must be installed on your system. Don't worry though, it comes with most popular distributions by default already! However, due to some distributions udev rules usbmuxd may stop running after no devices are connected causing Impactor to not detect the device after plugging it in. You can mitigate this by plugging your phone first then restarting the app.

Auto-refresh will not work the same on Linux as it would on other platforms like macOS/Windows, due to usbmuxd lacking WiFi connectivity so it will attempt to do it automatically only when a device is plugged in, we are looking for a proper solution though.

On Windows, iTunes must be downloaded so Impactor is able to use the drivers for interacting with Apple devices.

Note

Pairing file installation is only available for devices plugged in via USB.

Tip

chmod +x /path/to/AppImage after downloading may be required for Linux.

This project is still very new! Expect bugs to occur :)

What's Changed

• Added proper icon masking for AppIcon previews by @se2crid in #161
• Added support for SideStore(+LiveContainer) remote pairing file installation.
• Fixed apps (i.e. FilzaJailedDS) registering invalid group identifiers that start with anything other than group., by not registering them at all.

Full Changelog: v2.2.0...v2.2.1

Files

• Impactor-macos-universal.dmg: Impactor GUI for macOS.
• Impactor-windows-${arch}-${type}.exe: Impactor GUI for Windows on CPU architecture ${arch}.
• Impactor-linux-${arch}.AppImage: Impactor GUI for Linux on CPU architecture ${arch}
• plumesign-macos-universal: Impactor CLI for macOS.
• plumesign-windows-${arch}.exe: Impactor CLI for Windows on CPU architecture ${arch}.
• plumesign-linux-${arch}: Impactor CLI for Linux on CPU architecture ${arch}

v2.2.0

Important

On Linux, usbmuxd must be installed on your system. Don't worry though, it comes with most popular distributions by default already! However, due to some distributions udev rules usbmuxd may stop running after no devices are connected causing Impactor to not detect the device after plugging it in. You can mitigate this by plugging your phone first then restarting the app.

Auto-refresh will not work the same on Linux as it would on other platforms like macOS/Windows, due to usbmuxd lacking WiFi connectivity so it will attempt to do it automatically only when a device is plugged in, we are looking for a proper solution though.

On Windows, iTunes must be downloaded so Impactor is able to use the drivers for interacting with Apple devices.

Note

Pairing file installation is only available for devices plugged in via USB.

Tip

chmod +x /path/to/AppImage after downloading may be required for Linux.

This project is still very new! Expect bugs to occur :)

What's Changed

• Added a prompt for confirmation before resetting certificates by @se2crid in #139
• Added remote pairing support option for 17.4+.
  • This is still fairly new, supported apps: Feather, Antrag, Protokolle, Stikdebug

Full Changelog: v2.1.3...v2.2.0

Files

• Impactor-macos-universal.dmg: Impactor GUI for macOS.
• Impactor-windows-${arch}-${type}.exe: Impactor GUI for Windows on CPU architecture ${arch}.
• Impactor-linux-${arch}.AppImage: Impactor GUI for Linux on CPU architecture ${arch}
• plumesign-macos-universal: Impactor CLI for macOS.
• plumesign-windows-${arch}.exe: Impactor CLI for Windows on CPU architecture ${arch}.
• plumesign-linux-${arch}: Impactor CLI for Linux on CPU architecture ${arch}

v2.1.3

Important

On Linux, usbmuxd must be installed on your system. Don't worry though, it comes with most popular distributions by default already! However, due to some distributions udev rules usbmuxd may stop running after no devices are connected causing Impactor to not detect the device after plugging it in. You can mitigate this by plugging your phone first then restarting the app.

Auto-refresh will not work the same on Linux as it would on other platforms like macOS/Windows, due to usbmuxd lacking WiFi connectivity so it will attempt to do it automatically only when a device is plugged in, we are looking for a proper solution though.

On Windows, iTunes must be downloaded so Impactor is able to use the drivers for interacting with Apple devices.

Note

Pairing file installation is only available for devices plugged in via USB.

Tip

chmod +x /path/to/AppImage after downloading may be required for Linux.

This project is still very new! Expect bugs to occur :)

What's Changed

• Fixed crash on launch on earlier macOS versions by @se2crid in #154, this bug was introduced in Impactor v2.1.2.

Full Changelog: v2.1.2...v2.1.3

Files

• Impactor-macos-universal.dmg: Impactor GUI for macOS.
• Impactor-windows-${arch}-${type}.exe: Impactor GUI for Windows on CPU architecture ${arch}.
• Impactor-linux-${arch}.AppImage: Impactor GUI for Linux on CPU architecture ${arch}
• plumesign-macos-universal: Impactor CLI for macOS.
• plumesign-windows-${arch}.exe: Impactor CLI for Windows on CPU architecture ${arch}.
• plumesign-linux-${arch}: Impactor CLI for Linux on CPU architecture ${arch}

v2.1.2

Important

On Linux, usbmuxd must be installed on your system. Don't worry though, it comes with most popular distributions by default already! However, due to some distributions udev rules usbmuxd may stop running after no devices are connected causing Impactor to not detect the device after plugging it in. You can mitigate this by plugging your phone first then restarting the app.

Auto-refresh will not work the same on Linux as it would on other platforms like macOS/Windows, due to usbmuxd lacking WiFi connectivity so it will attempt to do it automatically only when a device is plugged in, we are looking for a proper solution though.

On Windows, iTunes must be downloaded so Impactor is able to use the drivers for interacting with Apple devices.

Note

Pairing file installation is only available for devices plugged in via USB.

Tip

chmod +x /path/to/AppImage after downloading may be required for Linux.

This project is still very new! Expect bugs to occur :)

What's Changed

• On macOS, the app icon now displays in the dock when a window is opened by @se2crid in #135
• Added Windows arm & x86 support by @sadan4 in #140
• Added StikStore integration.
• Fixed signing with large enterprise accounts by @EinTim23 in #142
• Fixed anisette not working correctly on new logins by switching providers.

New Contributors

• @sadan4 made their first contribution in #140
• @EinTim23 made their first contribution in #142

Full Changelog: v2.1.1...v2.1.2

Files

• Impactor-macos-universal.dmg: Impactor GUI for macOS.
• Impactor-windows-${arch}-${type}.exe: Impactor GUI for Windows on CPU architecture ${arch}.
• Impactor-linux-${arch}.AppImage: Impactor GUI for Linux on CPU architecture ${arch}
• plumesign-macos-universal: Impactor CLI for macOS.
• plumesign-windows-${arch}.exe: Impactor CLI for Windows on CPU architecture ${arch}.
• plumesign-linux-${arch}: Impactor CLI for Linux on CPU architecture ${arch}

v2.1.1

Important

On Linux, usbmuxd must be installed on your system. Don't worry though, it comes with most popular distributions by default already! However, due to some distributions udev rules usbmuxd may stop running after no devices are connected causing Impactor to not detect the device after plugging it in. You can mitigate this by plugging your phone first then restarting the app.

Auto-refresh will not work the same on Linux as it would on other platforms like macOS/Windows, due to usbmuxd lacking WiFi connectivity so it will attempt to do it automatically only when a device is plugged in, we are looking for a proper solution though.

On Windows, iTunes must be downloaded so Impactor is able to use the drivers for interacting with Apple devices.

Note

Pairing file installation is only available for devices plugged in via USB.

Tip

chmod +x /path/to/AppImage after downloading may be required for Linux.

This project is still very new! Expect bugs to occur :)

What's Changed

• Fixed icon preview flicker during IPA import by @se2crid in #134

Full Changelog: v2.1.0...v2.1.1

Files

• Impactor-macos-universal.dmg: Impactor GUI for macOS.
• Impactor-windows-x86_64-${type}.exe: Impactor GUI for Windows.
• Impactor-linux-${arch}.AppImage: Impactor GUI for Linux on CPU architecture ${arch}
• plumesign-macos-universal: Impactor CLI for macOS.
• plumesign-windows-x86_64.exe: Impactor CLI for Windows.
• plumesign-linux-${arch}: Impactor CLI for Linux on CPU architecture ${arch}