Set charge / discharge times?

[Spookster]

*Havent installed yet
Before I dive in, is there a documented way to set discharge / charge times from the interface via code example? (Home Assistant)
Im running a SMILE5 and the documentation and HA Dashboards youve provided doesnt seem to cover that specifically (although it would be possible)

Does anyone have a HA example? or did I miss it?

[dxoverdy]

The registers here ( https://github.com/dxoverdy/Alpha2MQTT/blob/4966f1f971f7648a23bdbb75225ca94c7a37ab1e/Alpha2MQTT/Definitions.h#L398) write those settings. For example, writing 1 to REG_TIMING_RW_TIME_CHARGE_START_TIME_1 Will set a start charge time of 00:01. Alternatively, you can set charge or discharge via an mqtt message. Dan

…

On Mon, 15 May 2023 at 22:34, Spookster ***@***.***> wrote: *Havent installed yet Before I dive in, is there a documented way to set discharge / charge times from the interface via code example? (Home Assistant) Im running a SMILE5 and the documentation and HA Dashboards youve provided doesnt seem to cover that specifically (although it would be possible) Does anyone have a HA example? or did I miss it? [image: image] <https://user-images.githubusercontent.com/982535/238477684-529f0079-9ef5-408b-97f0-a2b689873bd9.png> — Reply to this email directly, view it on GitHub <#8>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AZC7OYJ6HEXQRYINNJBQNILXGKONBANCNFSM6AAAAAAYCYHZCA> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[Spookster]

So theres nothing in the Alpha Write Register HA pages that specifically set it? (ie no dashboard pages that people have created specifically for that control?)
Ill delve in deeper once its running
Thanks Dan, your work seems like just what I want.. let the fun begin.....

[Spookster]

So this would give a time of 0.01?

service: mqtt.publish
data:
  retain: false
  topic: Alpha2MQTT/request/write/register/raw/data
  payload:
    registerAddress: "0x0851"
    value: 1
    dataBytes: 2
  qos: "0"

And this 2300?

service: mqtt.publish
data:
  retain: false
  topic: Alpha2MQTT/request/write/register/raw/data
  payload:
    registerAddress: "0x0851"
    value: 2300
    dataBytes: 2
  qos: "0"

[dxoverdy]

There is a dashboard which lets you specify a register address and a value and it will write it. It’s called Alpha Inverter Control or something like that. If you read the docs I’m sure the charge discharge times are set as minutes, so 0 would be midnight, 1439 would be 23:59 (60*23)+59. Although they were the first registers I played with when it comes to writing I just can’t remember. What I’d do is write 0 and see what happens, then 10, then 60, etc…. Regarding payloads, download mqttexplorer and do your initial testing through that. It’s an invaluable tool. What is your intention here can I ask? Dan

…

On Mon, 15 May 2023 at 22:57, Spookster ***@***.***> wrote: So theres nothing in the Alpha Write Register HA pages that specifically set it? (ie no dashboard pages that people have created specifically for that control?) Ill delve in deeper once its running Thanks Dan, your work seems like just what I want.. let the fun begin..... — Reply to this email directly, view it on GitHub <#8 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AZC7OYOF4DYABSM7UXNRPN3XGKRFHANCNFSM6AAAAAAYCYHZCA> . You are receiving this because you commented.Message ID: ***@***.***>

[Spookster]

Nothing too specific I guess, currently using Charles Gillanders code to switch to mains power to run a heat pump when temperatures drop early morning to preserve the battery for use during the day.
Normally the battery is set to discharge mode, but for that case, run it on mains and then switch back to battery
The only reason I switch to mains is to make use of the power credits I have accumulated :)

Other case use would be for variable 'free hours' various wholesalers offer here. (You can select on a daily basis which hour is free)
I currently get a fixed 3 hrs free between 9pm and 12, so it doesnt really effect mine. Thats the fixed battery charge time.

The intention is just to know that it can be done, changing charge and discharge times via automations easily

[jt1971]

*Havent installed yet Before I dive in, is there a documented way to set discharge / charge times from the interface via code example? (Home Assistant) Im running a SMILE5 and the documentation and HA Dashboards youve provided doesnt seem to cover that specifically (although it would be possible)

Does anyone have a HA example? or did I miss it?

My code is scrappy but works well using timed automations to send the mqttt messages using the brilliantly engineered alpha2mqtt work. Have got it to the point that it works semi-autonomously including managing charge/discharge with/without EV maximising benefit from Octopus Flux tariff.

It is too scrappy to share but happy to share the principles I used in HA?

[Spookster]

It is too scrappy to share but happy to share the principles I used in HA?

Id be happy to see what you have done to give some ideas?

[DannyBoy-PI]

My AlphaESS SMILE B3 can have 15, 30 & 45 minutes set for charge/discharge times. I have modified the Definitions.h, RegisterHandler.cpp and Alpha2MQTT.ino to include the new registry hex values for this, but the values for minutes always report zero. Any ideas as to what may be wrong (I followed the AlphaESS_Register_Parameter_List.pdf and ensured I have set the correct values (0x085E, 0x085F, 0x0860 & 0x0861)) ? Great project and far more reliable than trying to pull data from the Alpha Cloud.

[spiderdijon]

I have also noticed 0x085E, 0x085F, 0x0860 & 0x0861 appear to be always 0 even when set to 15,30,45 minutes in the app. Has anyone managed to set the minute registers successfully?

[DannyBoy-PI]

No, I haven't been able to get this to work. I contacted AlphaESS and they "claim" it is not supported on the B3. I set the times using the webpage and disconnected my B3 from the net and it charged at the specified time (10:15 -> 10:30 I seem to recall), so it does action the request locally (not a push from AlphaESS), I just have not found out where it is stored in the registry of the B3.....

[dxoverdy]

They were the first registers I wrote to as a test as they were pretty safe.
I found you could burn any time you wanted:

First Start Time Charge -- 00:30
{"registerAddress": "0x0856","value":30,"dataBytes":2}
First Stop Time Charge -- 04:30
{"registerAddress": "0x0857","value":270,"dataBytes":2}
Second Start Time Charge -- 17:51
{"registerAddress": "0x0858","value":1071,"dataBytes":2}
Second Stop Time Charge -- 18:42
{"registerAddress": "0x0859","value":1122,"dataBytes":2}

Just multiply 60 by the number of hours and add on the remaining minutes. 17:51 and 18:42 will appear on the web site, but I couldn't tell you if the inverter honours is. Sticking to 15 minutes at the very least will.

[DannyBoy-PI]

Interesting, I tried to set it for 02:15 (60 x 2 + 15) = 135 using the following:-
mosquitto_pub -h -p 1883 -t Alpha2MQTT/request/write/register/raw/data -m '{"registerAddress":"0x0856","dataBytes":2,"value":135}'
And it has set the charge start time for 15:00 ? Am I being a bit dim ?

[dxoverdy]

That’s weird. That suggests every 1 is worth 6.666 minutes. What does it change to if you just burn the value 1? Also, don’t forget, with your alpha2mqtt you can ping a four hour charge message manually at 2:15 if you are seeking to make use of a car tariff. Regards Dan

…

On Wed, 10 Apr 2024 at 11:04, DannyBoy-PI ***@***.***> wrote: Interesting, I tried to set it for 02:15 (60 x 2 + 15) = 135 using the following:- mosquitto_pub -h -p 1883 -t Alpha2MQTT/request/write/register/raw/data -m '{"registerAddress":"0x0856","dataBytes":2,"value":135}' And it has set the charge start time for 15:00 ? Am I being a bit dim ? — Reply to this email directly, view it on GitHub <#8 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AZC7OYM3DUWRZDRQQBWD5JTY4UFDNAVCNFSM6AAAAAAYCYHZCCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANBXGEYDQNBQGU> . You are receiving this because you commented.Message ID: ***@***.***>

[DannyBoy-PI]

Hi Dan,
Sending value 1 sets it to 01:00.
As for the reason behind me wanting this: On Intelligent Octopus Go, you get cheap rates during the day (if charging your car) if the weather is windy enough. I'm knocking up code to detect this and then making use of it to charge my Alpha Batts (and change the unit rate in my app) if I need too...
Cheers,
Dan M.

[DannyBoy-PI]

Even weirder, setting it to 130 changes the start time to 10:00 ????