Skip to content

Actions: espressif/esptool

Actions

Bot response to issues

Actions

Loading...
Loading

Show workflow options

Create status badge

Loading
issue_bot.yml
86 workflow runs
86 workflow runs

Filter by Event

⌥ + click/return to exclude

Filter by Status

⌥ + click/return to exclude

Filter by Branch

⌥ + click/return to exclude

Filter by Actor

⌥ + click/return to exclude
C6 fails to read with --no-stub at same place every time, and different place but fails reliably with stub. (ESPTOOL-1373) Bot response to issues #134: Issue #1184 edited by tyeth
1m 46s
1m 46s
C6 fails to read with --no-stub at same place every time, and different place but fails reliably with stub. (ESPTOOL-1373) Bot response to issues #133: Issue #1184 edited by tyeth
37s
37s
C6 fails to read with --no-stub at same place every time, and different place but fails reliably with stub. (ESPTOOL-1373) Bot response to issues #132: Issue #1184 opened by tyeth
39s
39s
esptool can access chip but can't access flash memory from a ESP32-U4WD (ESPTOOL-1372) Bot response to issues #131: Issue #1183 opened by aanban
2m 2s
2m 2s
esptool reports flash encryption enabled on factory-new esp32-c61 (ESPTOOL-1371) Bot response to issues #130: Issue #1182 edited by donpdonp
41s
41s
esptool reports flash encryption enabled on factory-new esp32-c61 (ESPTOOL-1371) Bot response to issues #129: Issue #1182 opened by donpdonp
40s
40s
v5.3.0 transport detection has no fallback when the port cannot be enumerated (virtualised serial devices) — stub upload then fails (ESPTOOL-1370) Bot response to issues #128: Issue #1181 opened by keithshawlab
45s
45s
espefuse.py can't create a json file (ESPTOOL-1367) Bot response to issues #127: Issue #1180 opened by S3bz0n3
32s
32s
Stub flasher fails to start on FTDI FT231X / macOS in 5.3.0+ ("Invalid head of packet" / "no response") — 5.3.dev3 works (ESPTOOL-1365) Bot response to issues #126: Issue #1179 opened by andreyvoronko
40s
40s
ESP32-S3 write_flash fails with 0105 checksum/invalid message error on v5.3.0, works fine on v4.8.1 (ESPTOOL-1363) Bot response to issues #125: Issue #1178 opened by vitorfr77
43s
43s
Bot response to issues Bot response to issues #124: opened by dreamlayers
50s
50s
Terminal output barely readable on light colour scheme. (ESPTOOL-1354) Bot response to issues #123: Issue #1175 edited by dreirund
37s
37s
Terminal output barely readable on light colour scheme. (ESPTOOL-1354) Bot response to issues #122: Issue #1175 opened by dreirund
36s
36s
Invalid head of Packet (0x08) despite being able to access REPL. (ESPTOOL-1347) Bot response to issues #121: Issue #1174 opened by confusedcatgirl
43s
43s
UnsupportedCommandError when trying to flash on a board with Secure Download Mode (ESPTOOL-1346) Bot response to issues #120: Issue #1173 opened by niketic95
43s
43s
Bot response to issues Bot response to issues #119: opened by satyamedh
44s
44s
Relatively slow flashing of 64MB flash (ESP32-P4 rev 1.3) (ESPTOOL-1339) Bot response to issues #118: Issue #1170 opened by Daniel-Abdi
16m 27s
16m 27s
NO_COLOR not always obeyed? (ESPTOOL-1334) Bot response to issues #117: Issue #1168 opened by leres
39s
39s
WAVESHARE USB to 8CH TTL: Failed to connect to ESP32-S3: Invalid head of packet (0xXX) (ESPTOOL-1333) Bot response to issues #116: Issue #1167 opened by KartikeyaKBoon
43s
43s
why is not the esp32-p4 silicon version 3.2 problem released to stable ASAP ? (ESPTOOL-1329) Bot response to issues #115: Issue #1165 opened by savenlid
45s
45s
PowerShell profile: Invalid syntax when accessing environment variable _IDF.PY_COMPLETE (ESPTOOL-1321) Bot response to issues #114: Issue #1164 opened by heheshizu
37s
37s
Support of older Systems (ESPTOOL-1316) Bot response to issues #113: Issue #1162 edited by dobairoland
43s
43s
Support of older Systems (ESPTOOL-1316) Bot response to issues #112: Issue #1162 opened by username7291
36s
36s
Doc is incorrect in basic-commands.html : read_flash parameter (ESPTOOL-1314) Bot response to issues #111: Issue #1161 opened by gmeader
32s
32s
Cant flash ESP32U: No serial data received (ESPTOOL-1312) Bot response to issues #110: Issue #1160 opened by StrPowKno
49s
49s