我在我的设备上发现一个现象，yumi会带来额外的约0.2w的负载。这在设备空闲+飞行模式的状态下可以显著观察到，无论是在官方调度还是第三方调度（如scene）的场景下，当我在设备空闲+飞行模式状态下观察，功耗会稳定表现在0.55w附近，而在使用yumi的情况下，功耗会表现在0.75w附近，屡次实验结论一致，看起来是yumi带来额外功耗，
我在想，有没有什么方法能够降低yumi的基础功耗，从日志上看，似乎Fps Monitor一直在运作？我并没有为应用配置FAS调度，也没有启动任何游戏，如果 Fas Monitor / fps loop 对功耗确实有比较明显的影响，未来是否可以对此优化一下，在不需要FAS的场景关闭Monitor，或者干脆新增一个配置字段暴力关闭FAS组件呢。
谢谢🙂
I noticed an issue on my device where Yumi introduces an additional power load of about 0.2W. This is particularly noticeable when the device is idle and in Airplane Mode.
Whether using the stock scheduler or a third-party one (like Scene), my baseline power consumption stays around 0.55W under idle + Airplane Mode conditions. However, with Yumi active, the power consumption consistently jumps to around 0.75W. This result is repeatable across multiple tests, which strongly suggests that Yumi is introducing extra power overhead.
I’m wondering if there’s a way to reduce Yumi’s idle/base power consumption. Looking at the logs, it seems the FPS Monitor is running continuously. I haven’t configured FAS scheduling for any app, nor am I running any games.
If the FAS Monitor / FPS loop does have a noticeable impact on power consumption, would it be possible to optimize this in a future update? For instance, automatically disabling the Monitor when FAS isn't needed, or simply adding a config option to completely force-disable the FAS module?
Thanks!🙂
我在我的设备上发现一个现象，yumi会带来额外的约0.2w的负载。这在设备空闲+飞行模式的状态下可以显著观察到，无论是在官方调度还是第三方调度（如scene）的场景下，当我在设备空闲+飞行模式状态下观察，功耗会稳定表现在0.55w附近，而在使用yumi的情况下，功耗会表现在0.75w附近，屡次实验结论一致，看起来是yumi带来额外功耗，
我在想，有没有什么方法能够降低yumi的基础功耗，从日志上看，似乎Fps Monitor一直在运作？我并没有为应用配置FAS调度，也没有启动任何游戏，如果 Fas Monitor / fps loop 对功耗确实有比较明显的影响，未来是否可以对此优化一下，在不需要FAS的场景关闭Monitor，或者干脆新增一个配置字段暴力关闭FAS组件呢。
谢谢🙂
I noticed an issue on my device where Yumi introduces an additional power load of about 0.2W. This is particularly noticeable when the device is idle and in Airplane Mode.
Whether using the stock scheduler or a third-party one (like Scene), my baseline power consumption stays around 0.55W under idle + Airplane Mode conditions. However, with Yumi active, the power consumption consistently jumps to around 0.75W. This result is repeatable across multiple tests, which strongly suggests that Yumi is introducing extra power overhead.
I’m wondering if there’s a way to reduce Yumi’s idle/base power consumption. Looking at the logs, it seems the FPS Monitor is running continuously. I haven’t configured FAS scheduling for any app, nor am I running any games.
If the FAS Monitor / FPS loop does have a noticeable impact on power consumption, would it be possible to optimize this in a future update? For instance, automatically disabling the Monitor when FAS isn't needed, or simply adding a config option to completely force-disable the FAS module?
Thanks!🙂