Skip to content

Fixed a lot of cubes #1

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Open
Arakula wants to merge 1 commit into
base: master
Choose a base branch
from
Open

Fixed a lot of cubes #1

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
2 changes: 1 addition & 1 deletion backspace.scad
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -114,7 +114,7 @@ module shaft(){
translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) cylinder(r=SHAFT_SPRING_HOLDER_WIDTH/2,h=100,$fs=0.3);
intersection(){
translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT]) cylinder(r=SHAFT_SPRING_HOLDER_NIPPLE_RADIUS,h=100,$fs=0.3);
translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube(100,100,100);
translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube([100,100,100]);
}
intersection(){
difference(){
Expand Down
2 changes: 1 addition & 1 deletion capslock.scad
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -114,7 +114,7 @@ module shaft(){
translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) cylinder(r=SHAFT_SPRING_HOLDER_WIDTH/2,h=100,$fs=0.3);
intersection(){
translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT]) cylinder(r=SHAFT_SPRING_HOLDER_NIPPLE_RADIUS,h=100,$fs=0.3);
translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube(100,100,100);
translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube([100,100,100]);
}
intersection(){
difference(){
Expand Down
6 changes: 3 additions & 3 deletions enter.scad
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -132,7 +132,7 @@ module shaft(){
translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) cylinder(r=SHAFT_SPRING_HOLDER_WIDTH/2,h=100,$fs=0.3);
intersection(){
translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT]) cylinder(r=SHAFT_SPRING_HOLDER_NIPPLE_RADIUS,h=100,$fs=0.3);
translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube(100,100,100);
translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube([100,100,100]);
}
intersection(){
difference(){
Expand Down Expand Up @@ -180,13 +180,13 @@ difference(){
translate([SHAFT_OFF_X,SHAFT_OFF_Y]) guard();
difference(){
translate([BLIND_SHAFT_OFF_X,BLIND_SHAFT_OFF_Y]) guard();
translate([SHAFT_OFF_X-OUTER_GUARD_RADIUS-100,-50,SLOPE_Z-100]) cube(100,100,100);
translate([SHAFT_OFF_X-OUTER_GUARD_RADIUS-100,-50,SLOPE_Z-100]) cube([100,100,100]);
}
difference(){
translate([0,SHAFT_OFF_Y]) cube([100,STRUT_THICKNESS,100],center=true);
translate([SHAFT_OFF_X,SHAFT_OFF_Y]) cube([2*OUTER_GUARD_RADIUS-WallThickness,100,100],center=true);
translate([BLIND_SHAFT_OFF_X,BLIND_SHAFT_OFF_Y]) cube([2*OUTER_GUARD_RADIUS-WallThickness,100,100],center=true);
translate([SHAFT_OFF_X-OUTER_GUARD_RADIUS-100,-50,SLOPE_Z-100]) cube(100,100,100);
translate([SHAFT_OFF_X-OUTER_GUARD_RADIUS-100,-50,SLOPE_Z-100]) cube([100,100,100]);
}
}
}
Expand Down
2 changes: 1 addition & 1 deletion key-double.scad
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -114,7 +114,7 @@ module shaft(){
translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) cylinder(r=SHAFT_SPRING_HOLDER_WIDTH/2,h=100,$fs=0.3);
intersection(){
translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT]) cylinder(r=SHAFT_SPRING_HOLDER_NIPPLE_RADIUS,h=100,$fs=0.3);
translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube(100,100,100);
translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube([100,100,100]);
}
intersection(){
difference(){
Expand Down
2 changes: 1 addition & 1 deletion key-std.scad
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -117,7 +117,7 @@ module shaft(){
translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) cylinder(r=SHAFT_SPRING_HOLDER_WIDTH/2,h=100,$fs=0.3);
intersection(){
translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT]) cylinder(r=SHAFT_SPRING_HOLDER_NIPPLE_RADIUS,h=100,$fs=0.3);
translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube(100,100,100);
translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube([100,100,100]);
}
intersection(){
difference(){
Expand Down
2 changes: 1 addition & 1 deletion num-enter.scad
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -117,7 +117,7 @@ module shaft(){
translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) cylinder(r=SHAFT_SPRING_HOLDER_WIDTH/2,h=100,$fs=0.3);
intersection(){
translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT]) cylinder(r=SHAFT_SPRING_HOLDER_NIPPLE_RADIUS,h=100,$fs=0.3);
translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube(100,100,100);
translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube([100,100,100]);
}
intersection(){
difference(){
Expand Down
2 changes: 1 addition & 1 deletion shift.scad
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -106,7 +106,7 @@ module shaft(){
translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) cylinder(r=SHAFT_SPRING_HOLDER_WIDTH/2,h=100,$fs=0.3);
intersection(){
translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT]) cylinder(r=SHAFT_SPRING_HOLDER_NIPPLE_RADIUS,h=100,$fs=0.3);
translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube(100,100,100);
translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube([100,100,100]);
}
intersection(){
difference(){
Expand Down
2 changes: 1 addition & 1 deletion shift_wide.scad
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -114,7 +114,7 @@ module shaft(){
translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) cylinder(r=SHAFT_SPRING_HOLDER_WIDTH/2,h=100,$fs=0.3);
intersection(){
translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT]) cylinder(r=SHAFT_SPRING_HOLDER_NIPPLE_RADIUS,h=100,$fs=0.3);
translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube(100,100,100);
translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-50,-50,0]) cube([100,100,100]);
}
intersection(){
difference(){
Expand Down
2 changes: 1 addition & 1 deletion space.scad
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -108,7 +108,7 @@ module shaft(){
translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE]) cylinder(r=SHAFT_SPRING_HOLDER_WIDTH/2,h=200,$fs=0.3);
intersection(){
translate([-SHAFT_X/2+SHAFT_SPRING_HOLDER_WIDTH/2+SHAFT_THICKNESS,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT]) cylinder(r=SHAFT_SPRING_HOLDER_NIPPLE_RADIUS,h=200,$fs=0.3);
translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-100,-100,0]) cube(200,200,200);
translate([0,0,SHAFT_LENGTH+SHAFT_SPRING_HOLDER_TO_BASE-SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT*1.5]) rotate(v=[0,1,0], a=atan(SHAFT_SPRING_HOLDER_NIPPLE_HEIGHT/(SHAFT_SPRING_HOLDER_NIPPLE_RADIUS*2))) translate([-100,-100,0]) cube([200,200,200]);
}
intersection(){
difference(){
Expand Down